- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
ELCOMETER - Cross Hatch Adhesion Tester (1542)
| Previous | 63 / 67 | Next |
ELCOMETER - Cross Hatch Adhesion Tester (1542)
Brand: Elcometer
Model: 1542
Description:
The Elcometer 1542 is ideal for measuring the cross-hatch adhesion of coatings up to 250μm (9.8mils) on flat surfaces and test panels. Measure on large or small panels by quickly changing the position of the guide wheel using the hexagonal wrench provided. Each cutter wheel consists of 8 cutting faces. When one face becomes worn, rotate the cutting wheel to the next face. The Elcometer 1542 is available with three different cutter spacings 1, 2 & 3mm for a range of coating thickness (see table below). The Elcometer 1542 is available on its own (Basic Kit) or as a Full Kit which includes a brush, magnifier & ISO or ASTM adhesive tape. There are also Advanced Kits which include all three (1, 2 & 3mm) cross-hatch adhesion testers, together with either ISO or ASTM adhesive tape.
Standards:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038.
Technical Specification:
Brand: Elcometer
Model: 1542
Description:
The Elcometer 1542 is ideal for measuring the cross-hatch adhesion of coatings up to 250μm (9.8mils) on flat surfaces and test panels. Measure on large or small panels by quickly changing the position of the guide wheel using the hexagonal wrench provided. Each cutter wheel consists of 8 cutting faces. When one face becomes worn, rotate the cutting wheel to the next face. The Elcometer 1542 is available with three different cutter spacings 1, 2 & 3mm for a range of coating thickness (see table below). The Elcometer 1542 is available on its own (Basic Kit) or as a Full Kit which includes a brush, magnifier & ISO or ASTM adhesive tape. There are also Advanced Kits which include all three (1, 2 & 3mm) cross-hatch adhesion testers, together with either ISO or ASTM adhesive tape.
Standards:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038.
Technical Specification: