- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
ELCOMETER - Cross Hatch Cutter (107)
| Previous | 62 / 67 | Next |
ELCOMETER - Cross Hatch Cutter (107)
Brand: Elcometer
Model: 107
Description:
The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction, this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.
• Robust design
• Large, non-slip grip
• Ideal for thin, thick or hard coatings
• A quick change, four-sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)
The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit.
Standards:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
Technical Specification:
Brand: Elcometer
Model: 107
Description:
The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction, this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.
• Robust design
• Large, non-slip grip
• Ideal for thin, thick or hard coatings
• A quick change, four-sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)
The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit.
Standards:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038
Technical Specification:
| Part Number | Description | Cutter Type | Coating Thickness | Certificate | |
| F10713222-1 | Elcometer 107 Basic Kit | 6 x 1 mm | 0 - 60μm | 0 - 2.0 mils | / |
| F10713348-6 | Elcometer 107 Full Kit with ISO Tape | 6 x 1 mm | 0 - 60μm | 0 - 2.0 mils | / |
| F10713348-1 | Elcometer 107 Full Kit with ASTM Tape 6 | 6 x 1 mm | 0 - 50μm | 0 - 2.0 mils | / |
| F10713222-2 | Elcometer 107 Basic Kit | 11 x 1 mm | 0 - 50μm | 0 - 2.0 mils | / |
| F10713348-2 | Elcometer 107 Full Kit with ASTM Tape | 11 x 1 mm | 0 - 50μm | 0 - 2.0 mils | / |
| F10713222-3 | Elcometer 107 Basic Kit | 11 x 1.5 mm | 0 - 90μm1 | 0 - 3.5mils1 | / |
| F10713222-4 | Elcometer 107 Basic Kit | 6 x 2 mm | 0 - 125μm | 0 - 5.0mils | / |
| F10713348-9 | Elcometer 107 Full Kit with ISO Tape | 6 x 2 mm | 0 - 120μm | 0 - 5.0mils | / |
| F10713348-4 | Elcometer 107 Full Kit with ASTM Tape | 6 x 2 mm | 50 - 125μm | 2.0 - 5.0mils | / |
| F10713222-5 | Elcometer 107 Basic Kit | 6 x 3 mm | 121 - 250μm | 5.0 - 10mils | / |
| Packing List |
Basic Kit: Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart) Full Kit: Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart), eye glass, brush and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carry case. |
||||
|
1 Approximate Thickness / Optional Calibration Certificate available. |
|||||