- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
ELCOMETER - Coating Thickness Gauge (456)
| Previous | 58 / 67 | Next |
ELCOMETER - Coating Thickness Gauge (456)
Brand: Elcometer
Model: 456
Description:
The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.
The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.
Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.
Separate coating thickness gauge models, with their wide range of probes, provide even greater dry film thickness measurement flexibility.
Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation.
Technical Specification:
* Whichever is the greater
¡ñ Certificate supplied as standard
For more information please click the below link for reference:
https://www.elcometer.com/en/
Brand: Elcometer
Model: 456
Description:
The Elcometer 456 Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.
The Elcometer 456 dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality - from the entry level Elcometer 456 Model B, to the top of the range Elcometer 456 Model T.
Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the Bigfoot™ internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results.
Separate coating thickness gauge models, with their wide range of probes, provide even greater dry film thickness measurement flexibility.
Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation.
Technical Specification:
| Display information | 2.4'' (6cm) QVGA colour TFT display, 320 x 240 pixels |
| Battery type | 2 x AA dry cell batteries, rechargeable batteries can also be used |
| Battery life | ~24 hours of continuous use at 1 reading per second5 |
|
Gauge dimensions (h x w x d) |
141 x 73 x 37mm (5.55 x 2.87 x 1.46'') |
| Gauge weight | 161g (5.68oz) including supplied batteries |
| Operating temperature | -10 to 50°C (14 to 122°F) |
| Packing List |
Elcometer 456 gauge, calibration foils (integrals only), wrist harness, transit case (T), protective case (B, S, T), 1 x screen protectors (S, T), 2 x AA batteries, operating instructions, USB cable (S, T), ElcoMaster® software (S, T) |
| Integral Model Options: | ||||
| Scale 1 | Range: 0-1500μm (0-60mils) | Accuracy*: ±1-3% or ±2.5μm (±0.1mil) | ||
| Resolution: 0.1μm: 0-100μm; 1μm: 100-1500μm (0.01mil: 0-5mils; 0.1mil: 5-60mils) | ||||
| Model B | Model S | Model T | C | |
| Elcometer 456 Ferrous Integral | A456CFBI1 | A456CFSI1 | A456CFTI1 | ¡ñ |
| Elcometer 456 Non-Ferrous Integral | A456CNBI1 |
See separate gauges with N2 PINIP™ Probe |
See separate gauges with N2 PINIP™ Probe |
¡ñ |
| Elcometer 456 Dual FNF Integral | A456CFNFBI1 | A456CFNFSI1 | A456CFNFTI1 | ¡ñ |
| Scale 2 | Range: 0-5mm (0-200mils) | Accuracy*: ±1-3% or ±20μm (±1.0mil) | ||
| Resolution: 1μm: 0-1mm; 10μm: 1-5mm (0.1mil: 0-50mils; 1mil: 50-200mils) | ||||
| For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance | ||||
| Model B | Model S | Model T | C | |
| Elcometer 456 Ferrous Integral | A456CFBI2 |
See separate gauges with F2 PINIP™ Probe |
See separate gauges with F2 PINIP™ Probe |
¡ñ |
| Scale 3 | Range: 0-13mm (0-500mils) | Accuracy*: ±1-3% or ±50μm (±2.0mils) | ||
| Resolution: 1μm: 0-2mm; 10μm: 2-13mm (0.1mil: 0-100mils; 1mil: 100-500mils) | ||||
| Model B | Model S | Model T | C | |
| Elcometer 456 Ferrous Integral | A456CFBI3 |
See separate gauges with F3 PINIP™ Probe |
See separate gauges with F3 PINIP™ Probe |
¡ñ |
| Separate Model Options | ||||
| Model B | Model S | Model T | C | |
| Elcometer 456 Ferrous Separate | A456CFBS | A456CFSS | A456CFTS | ¡ñ |
| Elcometer 456 Non-Ferrous Separate | A456CNBS | A456CNSS | A456CNTS | ¡ñ |
| Elcometer 456 Dual FNF Separate | A456CFNFBS | A456CFNFSS | A456CFNFTS | ¡ñ |
| Probes are supplied separately | ||||
* Whichever is the greater
¡ñ Certificate supplied as standard
For more information please click the below link for reference:
https://www.elcometer.com/en/