- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
SIUI - Ultraosnic Thickness Gage
| Previous | 55 / 65 | Next |
SIUI - Ultraosnic Thickness Gage
Brand: SIUI
Model: CTS-30A, CTS-30B
Description:
The CTS-30A or CTS-30B ultrasonic thickness gauge adopts microprocessor technology and advanced manufacture process design, can do the measurement of thickness and acoustic velocity on metal and many materials based on ultrasound measurement principle.
Specification:
Brand: SIUI
Model: CTS-30A, CTS-30B
Description:
The CTS-30A or CTS-30B ultrasonic thickness gauge adopts microprocessor technology and advanced manufacture process design, can do the measurement of thickness and acoustic velocity on metal and many materials based on ultrasound measurement principle.
Specification:
| Model | CTS-30A | CTS-30B |
| Measurement range | 0.80 ~ 300.00 mm (steel) | 0.80 ~ 400.00 mm (steel) |
| Gain | Standard | Low/ Standard/ High |
| User-defined Calibration | One point | One point / Two point |
| Measurement accuracy | 0.01mm/ 0.1mm | |
| Material velocity range | 1000~9999 m/s | |
| Probe frequency range | 2-7.5 MHz | |
|
Display error (With configured probe) |
When range is 0.80mm~9.99mm, measurement accuracy is ±0.01mm and tolerance is ±0.05mm. When range is 10.00mm~99.99mm, measurement accuracy is ±0.01mm and tolerance is ± (1%oH+0.04) mm. When range is 100.00mm~300.0mm, measurement accuracy ±0.01mm and tolerance is ≤ 3%oHmm. ¡¾Note¡¿: H is thickness of the detected material. |
|
| Tube Wall Thickness Measurement | With a standard configure probe, it can measure steel tube with diameter not less than Φ20mm and wall thickness not less than 2.0mm. | |
| Calibration | Auto calibration with built-in-test block (steel) | |
| Measurement function | Minimum measurement value capture, average measurement value, setup limit measurement value, difference measurement value, etc. Moreover, the CTS-30B has fast scan function. | |
| Measurement mode | R-B1 (transmission pulse to the first echo) | |
| Dynamic velocity measurement | Input the known thickness and the system may show the velocity of the inspected workpiece in real time. | |
| Power-saving | When out of operation for a while, the system will power off automatically. When the battery power is low, the screen will prompt. | |
| Buzzer | For measurement overange and calibration indication | |
| Data transmission | System internal data can be transferred to a PC via the USB port | |
| Storage function | Up to 5000 sets of measurement data (refer to measurement value and acoustic value) and 100 sets of parameter data (refer to measurement value and system setup, etc) can be saves. | |
| Language | Up to ten jinds of language for selection, including English, French, Spanish, Russian, Hungarian, Portuguese, Chinese, Czech, Swedish. | |
| Measure unit | Inch/mm | |
| Display screen | 2.2-inch Mono LCD (with backlight) with 128 x 64 pixels | |
| Power Supply | 2 size AAA batteries | |
| Operation time | Continuous operation for more than 30 hours | |
| Operation temperature | -10~40ºC | |
| IP Code | IP54 | |
| Weight | Approx. 120g | |
| Dimension | 100mm x 65mm x 25mm (L x W x H) | |
| Compatible probe | 5MHz | 2 MHz |
| 5 MHz | ||
| 7.5 MHz | ||
| High temperature probe | ||