- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
CEDAR 每 Torque Tester / Torque Meter DI-9M-8 & DI-9M-08
| Previous | 79 / 106 | Next |
CEDAR - Torque Tester DI-9M-8
CEDAR – Torque Meter
Brand: Cedar
Model: DI-9M-8 & DI-9M-08
Description:
DI-9 series is most suitable for checking and controlling the torque of Electric Screwdriver and Torque Driver.
Brand: Cedar
Model: DI-9M-8 & DI-9M-08
Description:
DI-9 series is most suitable for checking and controlling the torque of Electric Screwdriver and Torque Driver.
| Specification | DI-9M-8 | DI-9M-08 |
| Measuring range | 0.020‵8.000 N・m | 2.0‵800.0 mN・m |
| 0.20‵80.00 kgf・cm | 0.020‵8.000 kgf・cm | |
| 0.20‵70 lbf・in | 0.020‵7.000 lbf・in | |
| Accuracy | ±0.5% (499 digit or less ±3digit) | |
| Display | The 4 figures digital display of LCD | |
| The measurement direction | CW-CCW (right and left) | |
| Zero return by one touch | Return to zero by pressing clear button. | |
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |
| High and low limits judging function | High and low value are measurement within the limits, and can be set up. | |
| Real-time Output | Load torque value is outputted every about1/ 180 second. | |
|
The Maximum, the minimum, and the
average value display
|
The maximum, the minimum value, and average value of the saved data | |
| Data Output | ASCII format (baud rate 19200) | |
| Auto power save | 10 minutes no use, automatically switch off. | |
| Power supply | Ni-Cd chargeable battery 1.2V × 5cells 700mAh | |
| Charging time | About 3hours | |
| Continuous working time | About 12hours | |
| clearance | It is a display clearance in set-up time. (0.1 - 3.0 sec) | |
| Socket size | ↓ 20mm/ ↓9.5mm | |
| Dimension / Weight | W:160×D:125×H:55 / About 1kg | |
| Recommend buffer accessories |
Measuring joint OW-20/OW-60 |
Measuring joint OW-025/OW-10 |
|
Cube (with 5 sides screw hole) 20x20x20 (M2.6/M3/M4/M5/M6 Tap processing) |
||
| AC/DC adaptor | ||
| Exclusive receipt case | ||
| An inspection report, a proofreading certificate, a traceability system figure | ||