- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
TECLOCK - Constant Pressured Thickness Measuring Instruments PG-20J
| Previous | 11 / 13 | Next |
TECLOCK - Constant Pressured Thickness Measuring Instruments
Brand: Teclock
Model: PG-20J
Description:
These instruments comply with ISO (IRHD A-method) and JISK 6250 standards (ruled in physical test method general rule of rubber for vulcanized rubber and thermoplastic). This is a sheet block compatible type which can measure both thickness of test piece hardness IRHD below 35 and over 35 by this one unit. The contact point is diameter 5mm and pressure can be changed by only attaching and detaching weights. A product line-up with Φ45mm contact point and the measuring range of 0~13mm is prepared for both the sheet-like specimen and compression set specimen. The ISO document can also be issued (option).
Specifications:
Brand: Teclock
Model: PG-20J
Description:
These instruments comply with ISO (IRHD A-method) and JISK 6250 standards (ruled in physical test method general rule of rubber for vulcanized rubber and thermoplastic). This is a sheet block compatible type which can measure both thickness of test piece hardness IRHD below 35 and over 35 by this one unit. The contact point is diameter 5mm and pressure can be changed by only attaching and detaching weights. A product line-up with Φ45mm contact point and the measuring range of 0~13mm is prepared for both the sheet-like specimen and compression set specimen. The ISO document can also be issued (option).
Specifications:
| Model | Applicable standard | Application | Resolution | Measuring range | Load for surface (Measuring force) | Contact point diameter (Φ) |
| PG-18J | ISO / JIS K 6250 A-Method IRHD35 under IRHD35 and over | Sheet-like specimen and compression set specimen | 0.01mm | 0-13 mm |
20g (¡ù2) 44g (¡ù1) |
5mm |
(*1) Load: 22±5kPa giving to surface (*2) Load: 10±2kPa giving to both surface.