- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
IMADA 每 High Speed Peeling Tester
| Previous | 45 / 60 | Next |
IMADA – High Speed Peeling Tester
Brand: Imada
Model: IPTS-20N/5
Features:
Specifications:
*1 It does not guarantee complete protection against overload.
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)
Brand: Imada
Model: IPTS-20N/5
Features:
- Accurate graphing: It captures rapid force change due to its high sampling rate (2000Hz) thus ensures high repeatability.
- Automatic recording: Automatic recording, graphing and saving data when testing.
- One-click operation: Simply press the START button to start the test. It peels the sample to the set stroke (peel length).
- Visual analysis: Overlays Max. 5 graphs to allow for easy comparison and visual analysis. Automatically calculates Max/Min/Ave values of each graph and shows them in the same table.
Specifications:
| Model | IPTS-20N | IPTS-50N |
| Capacity | 20N | 50N |
| Resolution | 0.01N | |
| Accuracy | +/-0.2%F.S. +/-1digit | |
| Overload |
Approx.150%F.S (It warns with light flashing and buzzer when the force is over 110% of capacity.) |
|
| Sampling rate | Max.2000 data / sec (2000Hz) | |
| Test speed | 120, 200, 300, 500, 1000, 1500mm/min (Switchable) | |
| Stroke (length) | Travel of load cell: Approx. 400mm (Peel length: Approx.200mm) | |
| Peel angle | 165°-180° (Height and angle are adjustable.) | |
| Max. sample width |
Adhesion: 88mm (Grip: 20mm, Clamp: 50mm) |
|
| Max. sample thickness |
Grip: 3mm Clamp: 13mm |
|
| Safety device |
Emergency stop button, Overload prevention (Valid only when the power is ON) (*1) |
|
| Power | AC100 to 240V free input (*2) | |
| Weight | Approx. 11kg | |
| Operating environment | Temperature: 0 to 40°C Humidity: 20 to 80%RH | |
| Accessories |
Force Recorder Standard (graphing software), USB cable, Power cable, Film grip, Spacer block, Inspection certificate, Instruction manual |
|
*2 Please specify the voltage when you order. (Accessory varies depending on voltage.)