- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
IMADA 每 Standard Type Horizontal Motorized Test Stand
| Previous | 67 / 106 | Next |
IMADA – Standard Type Horizontal Motorized Test Stand
Brand: Imada
Model: MH2 series
Description:
Horizontal Motorized Test Stand MH2 series is the standard type with 500N to 2500N capacity. It is functional yet user-friendly model with easy operation. The horizontal design allows applying force horizontally. Its rugged design provides solutions for complex testing.
Feature:
Specifications:
*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (With up to 1000N model of ZTS/ZTA series)
*2 ZTS/ZTA series force gauge and optional cable CB-518 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options. e.g. When adding long stroke option to MH2-500N … Model: MH2-500N-L
*5 Capacity is reduced as below by some speed change options of MH2-500N.
-V600 capacity 250N, –V900 capacity 150N
*6 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*7 Mounting block is required to be attached to the DPU series (1000~5000N)
Brand: Imada
Model: MH2 series
Description:
Horizontal Motorized Test Stand MH2 series is the standard type with 500N to 2500N capacity. It is functional yet user-friendly model with easy operation. The horizontal design allows applying force horizontally. Its rugged design provides solutions for complex testing.
Feature:
- Achieves high repeatability with constant testing speed and position, high rigidity, and allows applying force horizontally due to horizontal design
- Handles various testings such as durability or compression testings with the digital setting of speed, counter function (number of tests to repeat), and timer function (pausing time)
- Handles a wide range of testing applications to meet your testing requirements with options such as -FA (inner linear scale)
- Enhances testing efficiency and safety with option -CN (I/O for external signals), allowing for communication for interlock and starting operation, etc
Specifications:
| Model | MH2-500N | MH2-2500N |
| Capacity | 500N | 2500N |
| Speed |
Digital 10 to 300mm/min [10 - 20mm/min: by 0.5mm/min] [20 - 100mm/min: by 5mm/min] [100 - 300mm/min: by 10mm/min] |
|
| Max. Sample Height (*1) | Approx. 245mm | Approx. 340mm |
| Rigidity | [Standard models] 0.5mm or below | |
| Stroke Limit | Controllable with horizontal knob | |
| Measuring Modes | Manual / Jog / Cycle mode | |
| Functions |
Counter (number of tests to repeat): Max. 65535 times Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec) |
|
| Control | Emergency stop, force control (*2), overload prevention (*2, *3) | |
|
Operating temperature
humidity
|
0 to +40 degree Celsius 35 to 70% (avoid condensation) |
|
| Voltage |
AC100 to 240V, 50/60Hz (Select from 100, 120 and 230V. Accessories are provided accordingly.) |
|
| Power Consumption | 50W | |
| Dimensions | Refer to dimensions shown in the diagram page 6/7 | |
| Weight | Approx. 14kg | Approx. 27kg |
| Accessories | Operation manual, power cable, spare fuse, tools, grip mounting plate, warranty certificate | Operation manual, power cable, spare fuse, tools, attachment mounting plate (GF-2), warranty certificate |
|
Available Options
(*4) (*5)
|
-CN: External signal input -S: Length scale -FA: Inbuilt liner scale -V45: Speed 1.5 to 45mm/min -V90: Speed 3 to 90mm/min -V450: Speed 15 to 450mm/min -V600: Speed 20 to 600mm/min -V900: Speed 30 to 900mm/min |
-CN: External signal input -S: Length scale -FA: Inbuilt linear scale -V75: Speed 2.5 to 75mm/min -V150: Speed 5 to 150mm/min |
|
Mountable Force Gauge (*6) |
Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (1000N or lower) Load cell: DPU series (500N or lower) |
Mechanical Force Gauge: FB, PS, PSM PSH series Digital Force Gauge: DST, DSV, ZTS, ZTA series Load cell: DPU series (500N or lower), DPU series (1000~5000N)(*7) |
*2 ZTS/ZTA series force gauge and optional cable CB-518 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options. e.g. When adding long stroke option to MH2-500N … Model: MH2-500N-L
*5 Capacity is reduced as below by some speed change options of MH2-500N.
-V600 capacity 250N, –V900 capacity 150N
*6 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*7 Mounting block is required to be attached to the DPU series (1000~5000N)