- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
SUNDOO - ST Series Digital Torque Tester
| Previous | 22 / 106 | Next |
ST Series - Digital Torque Meter
Brand: Sundoo
Model: ST-1, ST2, ST-5, ST-10, ST-20
Product Introduction:
ST Series Digital Torque Meter is R&D for testing and measuring many kinds of torque. The Meter is applied with the measured and calibrated torque of motorize or air-driving clamps, torque screwdriver and torque spanner. It is applied with the test of wrench force, wrest fractured force. The gauge is used in Electric industry, Light industry, Machinery manufacture, scientific research, and so on.
Product Features:
Technical Parameter:
Brand: Sundoo
Model: ST-1, ST2, ST-5, ST-10, ST-20
Product Introduction:
ST Series Digital Torque Meter is R&D for testing and measuring many kinds of torque. The Meter is applied with the measured and calibrated torque of motorize or air-driving clamps, torque screwdriver and torque spanner. It is applied with the test of wrench force, wrest fractured force. The gauge is used in Electric industry, Light industry, Machinery manufacture, scientific research, and so on.
Product Features:
- Peak holding and auto-releasing function: Catching and holding the peak value in test, the peak holding time can be set(1-10 seconds);
- Automatic power off function: This function saves battery and keeps the gauge safe, also the power off time(1-60minutes) can be set By yourself;
- Comparing function: Initial input of the tolerance limit(Max/Min)enables the device to judge the measured result as Go(Green pilot lamp)/NG(Red pilot lamp;
- Memory function: Memory 10 testing data, and calculate the average;
- Three units conversion: Converting three units(N.m, kgf.cm, ibf.in) automatically;
- RS-232C output: Connecting outside equipment and using the related CD for transmitting the tested data to computer for relevant treatment.
Technical Parameter: