PROSTAT - PAS-853B Wide Range Ohmmeter

Previous 4 / 19 Next

PROSTAT - PAS-853B Wide Range Ohmmeter Electrostatics (ESD) , Ionizer & Resistivity Meter PROSTAT - PAS-853B Wide Range Ohmmeter Electrostatics (ESD) , Ionizer & Resistivity Meter


PROSTAT - PAS-853B Wide Range Ohmmeter
Brand: Prostat
Model: PAS-853B

 

WIDE RANGE RESISTANCE METER DESIGNED TO SUPPORT ANSI/ESD S20.20 PROGRAM STANDARD
 
Product Features:

  • Wide Resistance Measurement Range from 0.01 ohm to 9.99x1012 ohms
  • Nominal Full Range Tolerance Averages <±5%
  • Fully Automatic Resistance Range, Test Voltage and Electrification Period Control
  • Automatic or Continuous Electrification Control
  • Rugged High Performance 80 inches (200cm) Test Leads Included
  • Powered by one long lasting 9V Alkaline Battery
  • Large, Easy to Read LCD Display
  • Meets requirements of ESD Association Standards for material and audit resistance measurement requirements
  • Certificate of Calibration Traceable to NIST included
 
Product Overview:
 
Hand Held Wide Range Resistance Meter
The PAS-853B is a wide range ohmmeter capable of measuring from 0.01 Ω to 9.99 x 1012 Ω, making it a single meter to meet requirements of almost all standards for resistance measurements.
Designed to Support ANSI/ESD S20.20
The PAS-853B is designed specifically for ESD Plant Auditors who must make many measurements quickly while supporting ANSI/ESD S20.20 program standard and periodic verification requirements.
Use it for Packaging per ANSI/ESD 541
The PAS-853B performs in accordance with standard resistance measurement practices outlined in ANSI/ESD S541 Packaging and meets all audit requirements of ESD TR53.
Variable & Constant Test Voltages

  • <10 Volts Variable from 0.01 to 9.9x103 ohms
  • 10 Volts (±<5% Constant Voltage) from 1.0x104 to 9.99x105 ohms
  • 100 Volts (±<2% Constant Voltage) from 1.0x106 to 9.99x1012 ohms
Double the Number of Measurements
The PAS-853B is a lightweight meter with a built-in electrification period of 3 seconds for measurements from 1.00E-2 Ω to 9.99E+5 Ω and 8 seconds from 1.00E+6 Ω to <1.00E+12 Ω, making it a quick and easy way to measure more surfaces throughout your day.
Fully Automatic with an Option of Continuous Mode
The PAS-853B will determine the resistance range and test voltage automatically when you make measurements. After the minimum electrification period, the display will freeze an accurate measurement for 10 seconds. Alternatively, the meter has the option of measuring in Continuous mode, which will continue to measure until Reset is pressed.
Complies to ANSI/ESD Standards
With the optional fixtures, the PAS-853B will measure resistance in accordance with the following ESD Association documents:

  • ESD TR53
  • ANSI/ESD S4.1
  • ANSI/ESD S7.1
  • ANSI/ESD STM11.11
  • ANSI/ESD STM11.12
  • ANSI/ESD STM11.13
  • ANSI/ESD S541
  • ANSI/ESD S20.20
 
General Specifications

Characteristics  
Measuring Range 0.01 Ω to 9.99 x 1012 Ω
Measurement Modes Auto, Manual and Continuous
Display 69.8 mm x 30.5 mm (2.75” x 1.20'')
6 digit - 7 segment TN display
Battery Power One 9V Alkaline Transistor Battery
Battery Life > 50 hours
Operating Temperature 18°C to 32°C (65°F to 90°F)
Operating Relative Humidity 10% – 60%, non-condensing
Operating Altitude 2000 m
Dimensions (WxHxD 109 mm x 184 mm x 36 mm
4.30 in x 7.25 in x 1.40 in
Weight 375 g (13.2 oz)
Case Material ABS Plastic with Rubber Side Grips
Color Grey
Warranty 1 Year Limited Warranty
 
Resistance Measurement Specifications

Measuring Range Accuracy1
0.1E-1 to 1.99E+0Ω ±10%, ±2 Counts
2.00E+0 to 9.99E+9Ω ±2%, ±2 Counts
1.00E+10 to 9.99E+10Ω ±5%, ±2 Counts
1.00E+11 to 9.99E+11Ω ±10%, ±2 Counts
1.00E+12 to 9.99E+12Ω ±20%, ±4 Counts
  • 1 Tolerance and accuracy measurements were conducted under controlled conditions with close tolerance reference resistors.
     
Test Voltages
Test Voltage Constant Voltage Auto Mode Manual Operation
<10V Variable (Based on resistance Load) Functional within range
0.01 Ω to <1.0E+4 Ω
Resistance Range:
0.01E-1 to 9.99E+9 Ω
10V Constant Voltage (Under Load) Functional within range
1.0E+4 Ω to <1.0E+6 Ω
Resistance Range:
0.9E+4 to 9.99E+10 Ω
100V Constant Voltage (Under Load) Functional within range
1.0E+6 Ω to <1.0E+13 Ω
Resistance Range:
0.90E6 to 9.99E12 Ω
  • 1 at 23°C (73.5°F) and 30% RH
 
Measurement Modes

Mode Resistance Range Test Voltage  
Auto Automatic Automatic @<10V: 0.01 to <1.00E+04 Ω
@ 10V: 1.00E+04 to <1.00E+06 Ω
@100V: 1.00E+06 to <2.00E+14 Ω
<10V Manual Operation 0.01E-1 to 9.99E9 Ω 0.01 to 9.99V  
10V Manual Operation 0.98E4 to 9.99E10 Ω Nominal, Semi-Constant  
100V Manual Operation 0.98E6 to 9.99E12 Ω 100V (±<5V) Constant Voltage  
 
Electrification Period

Resistance Range Measurement Period Minimum Electrification Period
1.00E-2 Ω to <1.00E6 Ω 2 seconds 3 seconds
1.00E6 Ω to <1.00E12 Ω 2 seconds 8 seconds
1.00E12 Ω to <1.00E13 Ω Variable 12 seconds
 
What’s Included in this Package:
 

  • PAS-853B Wide Range Ohmmeter
  • PAS-853BLR 200 cm Silicone Test Lead - Red
  • PAS-853BLB 200 cm Silicone Test Lead - Black
  • PTB-915 Audit Test Bed
  • PSI-870MAC Alligator Clip (2)
  • PRS-801BC Bulldog Clip
  • 800S Test Lead Shunt

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Recent Updates