- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
NOVOTEST - Coating Thickness Gauge TP-2020
| Previous | 9 / 22 | Next |
NOVOTEST - Coating Thickness Gauge TP-2020
Brand : Novotest
Model : TP-2020
Product Desription
Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).
Product Features
Technical Specification
Magnetic Properties Chart:
Brand : Novotest
Model : TP-2020
Product Desription
Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).
Product Features
- Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals
- Automatic sensor detection
- Wide range of sensors for different tasks
- Selecting units of measure
- Storing individual calibrations in probes memory
- Average calculation, minimum and maximum indication
- High measurement accuracy
- Transfer of measurement data to PC via usb
- Portability
- Large buttons
- Enlarged screen
- Shockproof housing with a special protective silicone bumper case
- Charge control
Technical Specification
| Thickness measurement range(depends on probe type) | 0 µm … 60 mm |
| Measured parameter | coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature |
| Measuring units | μm, mm, inch, mil |
| Revision modes | calculation of average, indication of minimum and maximum |
| PC connection | yes |
| Menu languages | English, Spanish, French, Russian |
| Dimensions, mm | 122x60x25 |
| Operating temperature range, ° C | -20 … +40 ° C |
| Batteries | 2 AA |
| Type of connectors of probes | Lemo |
| Storage of measurement results and PC software (optional) | 256 |
| Standards | AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32, ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159 |
| Time of continuous work hours, not less | 20 |
| Weight of electronic unit with batteries, no more, kg | 0.2 |
Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020
|
Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys) |
||||
| Type of probe | Coating thickness measurement range | Measurement accuracy | Dimensions of the probe, mm | Purpose |
| probe F-0,3 | 0-300 μm | ±(0,03h+0,001) mm | Ø5×40 | Measurement of paint, varnish and galvanic coatings |
| probe F-0,5 | 0-500 μm | ±(0,03h+0,001) mm | Ø 8×15 | |
| probe F-2 | 0-2000 μm | ±(0,03h+0,002) mm | Ø 10×35 | Measurement of paint and varnish coatings |
| probe F-5 | 0-5000 μm | ±(0,03h+0,002) mm | Ø 18×40 | Measurement of paint, varnish and mastic coatings |
|
Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys) |
||||
| probe NF-2 | 0-2000 μm | ±(0,03h+0,002) mm | Ø 12×35 | Measurement of anodic-oxide films and paint coatings |
| Thick coatings on metals (dielectric coatings on metals) | ||||
| probe M-12 | 0-12 mm | ±(0,03h+0,02) mm | Ø 15×50 | Measurement of mastic coatings |
| probe M-30 | 0-30 mm | ±(0,03h+0,03) mm | Ø 40×50 | |
| probe M-60 | 0-60 mm | ±(0,03h+0,05) mm | Ø 70×60 | |
|
Measurement of surface roughness, Rz (After abrasive blasting pre-painting work) |
||||
| probe DSH | 2-300 μm | ±(0,03h+0,002) mm | Ø 18×40 | Measurement of surface roughness after sand and shot blasting |
| Temperature, humidity and dew point | ||||
| probe DT | -50 … +80 ° C | + / – 1 ° C | Ø 12×107 | Temperature measurement |
| probe DTVR |
Humidity: 0 – 100% Temperature: -50 … 80 °C Dew point: -15 – +40 °C |
± 5% ± 1 ° C ± 2 ° C |
Ø 50×120 | Measurement of temperature, humidity and dew point |
Magnetic Properties Chart: