- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
VIBER X1 - Pocket Vibration Meter
| Previous | 24 / 85 | Next |
VIBER X1 - Pocket Vibration Meter
Product Description:
VIBER X1™ vibration meter is an analog vibration measuring instrument for control and measurement of the mechanical vibration and bearing condition. A flexible instrument that fits in every maintenance engineer's pocket. VIBER X1™ vibration meter is a complete analog instrument Dense built-in charger, selectable frequency ranges and an interchangeable accelerometer (BNC connector), and just as easy and reliable as its predecessor. Measury very accurate right down to the 2 Hz, with the push of a button is changed frequency range (2Hz - 1000 Hz, 10-1000 Hz, 2Hz-givarmax, 10 Hz-givarmax).
Interchangeable accelerometer and cable proide economy and safety because it can easily be replaced if something breaks and that you do not need to be close to rotating parts. Clear LED indication displays the frequency range that is selected. Charger, manual, accelerometer with 1m cable and flat magnet and soft bag with shoulder strap and belt clip is included.
Product Features:
Technical Specifications:
Product Description:
VIBER X1™ vibration meter is an analog vibration measuring instrument for control and measurement of the mechanical vibration and bearing condition. A flexible instrument that fits in every maintenance engineer's pocket. VIBER X1™ vibration meter is a complete analog instrument Dense built-in charger, selectable frequency ranges and an interchangeable accelerometer (BNC connector), and just as easy and reliable as its predecessor. Measury very accurate right down to the 2 Hz, with the push of a button is changed frequency range (2Hz - 1000 Hz, 10-1000 Hz, 2Hz-givarmax, 10 Hz-givarmax).
Interchangeable accelerometer and cable proide economy and safety because it can easily be replaced if something breaks and that you do not need to be close to rotating parts. Clear LED indication displays the frequency range that is selected. Charger, manual, accelerometer with 1m cable and flat magnet and soft bag with shoulder strap and belt clip is included.
Product Features:
- Total level (mm/s RMS) and bearing condition
- Easy to use, start and measure
- Dust-and waterproof, for use under though conditions (IP65)
- Interchangeable accelerometer with cable
- Selectable frequency ranges
- Analog instruments with high measurement accuracy and reliability
Technical Specifications:
| Vibration transducer | Accelerometer | Standard nom 100 mV/g | (Adjusted to the instrument) |
| Input amplitude range | Vibration | Max 20g RMS | With another sensor up to 200 g |
| Bearing condition | Max 20 gBC | ||
| Dynamic range | 60 dB (159 Hz) | ||
| Frequency range | Vibration |
2 - 1000 Hz 10 – 1000 Hz 2 - Max Hz 10 – Max Hz |
Note 1 |
| Bearing condition | 0.5 to 16 kHz | ||
| Vibration units | g-value, mm/s | Note 2 | |
| Amplitude presentation | RMS | ||
| Signal processing | Analogous | ||
| Accuracy | Vibration | ± 3 % | Note 3 |
| Bearing condition | ± 5 % | Note 4 | |
| Battery | Rechargeable Lithium or NiMH (AAA) | Note 5 | |
| Operating time | Min 24 or 12 hours for a full charged battery pack | Note 6 | |
| External charger | 5,0 V Lithium or 7,5 V NiMH (AAA) | ||
| LED display | 7 segments | ||
| Enclosure protection | IP65 | ||
| Operating temp. range | -20 to 60°C | ||
| Weight | 285 grams | Note 7 | |
| Size (L x W x H) | 125mm x 70mm x 40mm | ||