UNIPULSE - Digital Indicator (F340A) Weighing Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd

UNIPULSE - Digital Indicator (F340A)

7 / 74

UNIPULSE - Digital Indicator (F340A)

Brand: Unipulse
Model: F340A

Product Descriptions:

F340A is a digital indicator for strain gauge type sensors that measure pressures, load, and torque. It is best used in the Pass/Fail acceptance judgement performed by automated devices and testers. F340A is a practical device equipped with compact DIN 96 square size, peak/sample hold function, and the equivalent input calibration function which allows calibration by simply key-inputting the rated value of the sensor without applying an actual load. This digital indicator has been made affordable while including all of these convenient functions at the same time.

Product Specifications:

ANALOG SECTION
Sensor excitation voltage	10 / 2.5V DC ±10%; Output current: within 30 mA
Signal input range	-3.0 to +3.0 mV / V
Accuracy	Non-linearity: within 0.02% / FS (at 3 mV / V input) Zero drift: within 0.5 μV / °C RTI Gain drift: within 25 ppm / °C
A/D converter	Speed: 100 times / sec. Resolution: 16 bit (binary)
Analog filter	Selectable from 4, 10, 100, 3k Hz Low-pass filter (-6dB / oct.)
Peak hold function (High-speed analog hold method)	At 3 mV/V input: Performance response speed: approx. 1 kHz (at sine wave input, analog filter 3 kHz) Accuracy: 0.1% FS or less, Reset time: 50 μs or less
Voltage output	Analog voltage proportional to sensor input; Output level: approx. 2V per 1 mV / V input
SI / F output	Output data: Indicated value, status
DISPLAY SECTION
Display unit	15 mm character height; 7-segment red LED numerical display (5 digits) Digit numerals: ±8.8.8.8.8 Indicated value: -19999 to +19999 Decimal points: selectable decimal point displaying position
Display items	Status display: 5 red LED display for HI, OK, LOW, PEAK, HOLD Display times/sec: selectable from 3, 6, 13, and 25 times/sec.
Setting Section
Setting items	Calibration: Zero / Span calibration (actual load / equivalent input calibration) HI limit, LO limit, HI/LO comparison mode, hysteresis, digital offset, near zero, digital filter, analog filter, auto print, hold value point, LOCK, min scale, display frequency, excitation voltage, BCD data update rate, RS-232C, D/A converter zero setting, D/A converter full scale settings
External signal
External signal I/O signal	HI limit relay (N/O) output, LO limit relay (N/O) output, digital zero input, hold input
Interface	SIF: 2-wire type serial interface 232: RS-232C communication interface (Optional) BCO: BCD parallel data output interface (Optional) DAV: D/A converter interface (voltage output) (Optional) DAI: D/A converter interface (current output) (Optional) *Only 1 option can be installed
GENERAL PERFORMANCE
Power supply voltage	100V to 240V AC (+10% - 15%) (free power supply), 50/60 Hz, 12 to 24V DC (±15%) (Please specify when ordering.)
Power consumption	15W max
Operating conditions	Temperature: Working temperature range -10 to +40°C; Storage temperature range -40 to +80°C Humidity: 85% RH or less (non-condensing)
Dimensions	96 (W) x 96 (H) x 135 (D) mm (protruding parts not included)
Panel cut-out dimensions	92 x 92 (+1-0) mm
Weight	Approx. 0.9kg
CE marking certification	EMC directives: EN61326-1 Safety standard: EN61010-1, EN62311
Attachments	AC input cord (nominal rating 125A) 3m * x1 3P-2P conversion plug for AC input cord * x1 Mini driver x1 Ferrite core for sensor cable x1 Ferrite core for AC input cord * x1 BCD output connector (when BCD output option is installed) x1 Operation manual x1 *Included only for AC power supply specifications

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*

UNIPULSE - Digital Indicator (F340A)

Quick Links

Recent Post

Contact