- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
RANKCONN - GRAMMAGE CIRCULAR SAMPLE CUTTER (GSM) (RC-C001)
| Previous | 154 / 428 | Next |
RANKCONN - GRAMMAGE CIRCULAR SAMPLE CUTTER (GSM)
Brand : RANKCONN
Model : RC-C001
Product description :
Features :
Sampler locking device after use, rotate to its original position, the blade is not exposed, to avoid hand injuries and other items.
Structure and Adjustment: Double blade cutter blade to a total of four pieces of circular external four equal parts, the blade can be replaced, the specific operation is: Loosen the Phillips screws (four screws on each piece), remove the blade plate and sampling blade change a new blade, the pressure on the blade plate, note the blade clockwise tangential mouth, and make four incisions in the same plane, and then tighten the Phillips screw.
Brand : RANKCONN
Model : RC-C001
Product description :
Used to cut all kinds of textiles, carpet, cardboard included: wool fabrics, cotton fabrics,
man-made fabrics and knitting products.
Features :
Cutting area: 100cm2 Double-edged blades, both sides can be used, more durable the
weight of the cutting sample times 100, you can easily calculate the weight per square
meter accurate cutting area
Usage :
Put the tile need to be cut on the rubber mat fabric, put the disc sampler on the fabric, pull the locking device on the sampler, rotated about 90 degrees, hand held onto the cover, one hand holding the corrugated hand wheel, and exert a certain pressure, and then ripple hand wheel clockwise (angle greater than 90 degrees), then the circle and cut the sample.Usage :
Sampler locking device after use, rotate to its original position, the blade is not exposed, to avoid hand injuries and other items.
Structure and Adjustment: Double blade cutter blade to a total of four pieces of circular external four equal parts, the blade can be replaced, the specific operation is: Loosen the Phillips screws (four screws on each piece), remove the blade plate and sampling blade change a new blade, the pressure on the blade plate, note the blade clockwise tangential mouth, and make four incisions in the same plane, and then tighten the Phillips screw.