- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
RANKCONN - SD Series Ultrasonic Cleaner
| Previous | 5 / 88 | Next |
Demonstrate - SD Series Ultrasonic Cleaner
RANKCONN - Ultrasonic Cleaner
Brand: Rankconn Instruments
Model: 009SD, 010SD, 020SD, 030SD, 031SD, 040SD, 060SD, 080SD, 100SD
Product introduction:
Ultrasonic cleaner bath is an equipment that works through high-frequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves, typically 40 kHz, agitate the liquid solution of water or solvent, and cause the cavitation of solution molecules.
Application:
Standard ultrasonic cleaners adopt high-quality stainless-steel plate with strong
corrosion resistance and long lifespan, transducers with advance ed connection sticking
technology, high electroacoustic conversion efficiency and strong ultrasonic output, also equipped with automatic constant temperature heating device.
Temperature range: RT ~80℃.
Suit for varies industries and objects cleaning, such as precision electronic parts, eyeglasses & clock parts, optical glass parts, hardware, jewelry, semiconductor silicon wafer, printer inkjet, medical instruments and electroplate parts etc.
Specification:
What is Degassing for Ultrasonic Cleaner ?
When you fill your tank with fresh cleaning solution, that liquid has a lot of air trapped in it. So as long as it’s in there, you’ll be using ultrasonic energy to drive it out – instead of cleaning your parts.
The solution is to de-gas your tank, by running the ultrasonics and heat for 3-8 minutes before you put your parts in. The time needed will vary depending on your tank size and power level.
Simply fill your tank with hot water, or run the heat to get it up to cleaning temperature.
Then turn on the sonics just as you would for cleaning.
Brand: Rankconn Instruments
Model: 009SD, 010SD, 020SD, 030SD, 031SD, 040SD, 060SD, 080SD, 100SD
Product introduction:
Ultrasonic cleaner bath is an equipment that works through high-frequency sound waves transmitted through liquid to scrub clean the surface of immersed parts. The high-frequency sound waves, typically 40 kHz, agitate the liquid solution of water or solvent, and cause the cavitation of solution molecules.
Application:
Standard ultrasonic cleaners adopt high-quality stainless-steel plate with strong
corrosion resistance and long lifespan, transducers with advance ed connection sticking
technology, high electroacoustic conversion efficiency and strong ultrasonic output, also equipped with automatic constant temperature heating device.
Temperature range: RT ~80℃.
Suit for varies industries and objects cleaning, such as precision electronic parts, eyeglasses & clock parts, optical glass parts, hardware, jewelry, semiconductor silicon wafer, printer inkjet, medical instruments and electroplate parts etc.
Specification:
 Model |
Capacity | Frequency |
 UltrasonicPower (W) |
 HeatingPower (W) |
 Tank S(LxWxH mm) |
 Unit S(LxWxH mm) |
 Temp. (℃) |
 T |
| 009SD | 1.3 | 40 | 30/60 | 150 | 150x135x65 | 175x165x160 | 05-90 | 0-30 |
| 010SD | 2 | 40 | 30/60 | 150 | 150x135x100 | 175x165x190 | 05-90 | 0-30 |
| 020SD | 3.2 | 40 | 60/120 | 150 | 240x135x100 | 265x165x225 | 05-90 | 0-30 |
| 030SD | 4.5 | 40 | 90/180 | 300 | 300x150x100 | 325x175x230 | 05-90 | 0-30 |
| 031SD | 6.5 | 40 | 90/180 | 300 | 300x150x150 | 325x175x270 | 05-90 | 0-30 |
| 040SD | 10 | 40 | 120/240 | 450 | 300x240x150 | 325x265x275 | 05-90 | 0-30 |
| 060SD | 15 | 40 | 180/360 | 450 | 330x300x150 | 355x325x275 | 05-90 | 0-30 |
| 080SD | 22 | 40 | 240/480 | 600 | 500x300x150 | 530x330x280 | 05-90 | 0-30 |
| 100SD | 30 | 40 | 300/600 | 600 | 500x300x200 | 530x330x330 | 05-90 | 0-30 |
What is Degassing for Ultrasonic Cleaner ?
When you fill your tank with fresh cleaning solution, that liquid has a lot of air trapped in it. So as long as it’s in there, you’ll be using ultrasonic energy to drive it out – instead of cleaning your parts.
The solution is to de-gas your tank, by running the ultrasonics and heat for 3-8 minutes before you put your parts in. The time needed will vary depending on your tank size and power level.
Simply fill your tank with hot water, or run the heat to get it up to cleaning temperature.
Then turn on the sonics just as you would for cleaning.