RANKCONN - Electric Press Cut Machine ECM-10 Brand : Rankconn Instruments Model : ECM-10 Product Description ECM-10 electric press cut machine is a pure electric punching machine carefully developed by our factory. This machine is used by rubber and plastic factories and scientific research units to punch and cut standard rubber test pieces before tensile test. For similar materials, this machine can also be punched and cut. The machine is purely electric control (no hydraulic oil required), the precision screw drives the pressure plate beam up and down, and only the upper and lower button switches can be manipulated to complete the punching action. Compared with the first generation of products, it has the advantages of higher fuselage strength, more convenient operation, greater punching force and longer service life. Technical Specification 1. Stroke range: 70mmMax 2, punching force: greater than 20kN (2 tons). 3. Table size (effective): 220mm×200mm 4. Dimensions: 300mm×400mm×500mm 5. Power supply voltage: 220V 50Hz 6. Weight: 55kg Operation method   1. Put a knife mold pad on the base platform (thick cardboard or an abandoned thick book can also be used); 2. Place the specimen blank on the surface of the pad; 3. Place the cutter on the specimen on the table, make the cutting blade plane parallel to the base platform, and visually align the beam of the machine; 3. Press and hold the green button switch, the pressure plate beam moves downwards, the beam is in contact with the cutter, and the green button is activated until the standard specimen is completed. Press the red button on and off, move the table upwards to return to position (do not move the beam to the upper limit position), and then the cut specimen can be removed.   Precautions and maintenance   1. The cutting cutting blade plane should be parallel to the table plane, and the cutting-edge surface should not be in contact with the table plane when punching and cutting, so as not to damage the cutting knife blade. 2. After the punching cutting knife is used, it should be coated with anti-rust oil to prevent rust. 3. The pad plate under the specimen is not easy to select a strong plastic plate. 4. When the beam is returned, please do not move the beam to the upper limit position. 5. After use, apply dust cover to prevent oil and dust from infiltrating. read more

FLUKE - Pressure Gauge Calibrator 700G Brand : Fluke Model : 700G Product Description Designed for field pressure calibration, the Fluke 700G Series Pressure Gauge Calibrators give you the performance and durability that you have come to expect in Fluke pressure calibration products while being simple and easy-to-use. Product Features Precision pressure gauge calibrators designed for fast, accurate test results Make precise pressure measurements from ±10 inH2O/20 mbar to 10,000 psi/690 bar Highly accurate; 0.05% measurement uncertainty for 1 year Easily view in most environments with bright backlit display Take your gauge anywhere with a rugged protective holster Technical Specification Model Range Resolution Accuracy Burst Pressure Fluke-700G01 -10 to +10 inH2O -20 mbar to 20 mbar 0.001 inH2O, 0.001 mbar Positive pressure ±0.1% of range, Vacuum ±0.1% of range 3 psi, 210 mbar Fluke-700G02 -1 to +1 psi, -70 mbar to 70 mbar 0.0001 psi, 0.001 mbar Positive pressure ±0.1% of range, Vacuum ±0.1% of range 5 psi, 350 mbar Fluke-700G04 -14 to 15 psi, -0.97 to 1 bar 0.001 psi, 0.0001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 60 psi, 4 bar Fluke-700G05 -14 to 30 psi, -0.97 to 2 bar 0.001 psi, 0.0001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 120 psi, 8 bar Fluke-700G06 -12 to 100 psi, -0.83 to 6.9 bar 0.01 psi, 0.0001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 400 psi, 26 bar Fluke-700G27 -12 to 300 psi, -0.83 to 20 bar 0.01 psi, 0.001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 1200 psi, 80 bar Fluke-700G07 -12 to 500 psi, -0.83 to 34 bar 0.01 psi, 0.001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 2000 psi, 138 bar Fluke-700G08 -14 to 1000 psi, -0.97 to 69 bar 0.1 psi, 0.001 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 4000 psi, 266 bar Fluke-700G10 -14 to 2000 psi, -.97 bar to 140 bar 0.1 psi, 0.01 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 8000 psi, 550 bar Fluke-700G29 -14 to 3000 psi, -0.97 to 200 bar 0.1 psi, 0.01 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 10000 psi, 690 bar Fluke-700G30 -14 to 5000 psi, -0.97 to 340 bar 0.1 psi, 0.01 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 10000 psi, 690 bar Fluke-700G31 -14 to 10000 psi, -0.97 to 690 bar 1 psi, 0.01 bar Positive pressure ±0.05% FS Vacuum ±0.1% FS 20000 psi, 1035 bar Fluke-700GA4 0 to 15 psia, 0 to 1 bar absolute 0.001 psi, 0.0001 bar ±0.05% of range 60 psi, 4 bar Fluke-700GA5 0 to 30 psia 0 to 2 bar absolute 0.001 psi, 0.0001 bar ±0.05% of range 120 psi, 8 bar Fluke-700GA6 0 to 100 psia, 0 to 6.9 bar absolute 0.01 psi, 0.0001 bar ±0.05% of range 400 psi, 27 bar Fluke-700GA27 0 to 300 psia, 0 to 20 bar absolute 0.01 psi, 0.001 bar ±0.05% of range 1200 psi, 80 bar Fluke-700RG05 -14 to +30 psi, -0.97 to +2 bar 0.001 psi, 0.0001 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.05% of range 90 psi, 6 bar Fluke-700RG06 -12 to 100 psi, -0.83 to 6.9 bar 0.01 psi, 0.0001 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 400 psi, 27 bar Fluke-700RG07 -12 to 500 psi, -0.83 to 34 0.01 psi, 0.001 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 2000 psi, 138 bar Fluke-700RG08 -14 to 1000 psi, -0.97 to 69 bar 0.1 psi, 0.001 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 4000 psi, 275 bar Fluke-700RG29 -14 to 3000 psi, -0.97 to 200 bar 0.1 psi, 0.01 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 10000 psi, 690 bar Fluke-700RG30 -14 to 5000 psi, -0.97 to 340 bar 0.1 psi, 0.01 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 15000 psi, 1035 bar Fluke-700RG31 -14 to 10000 psi, -0.97 to 690 bar 1 psi, 0.01 bar Positive pressure, ±0.04% of reading +.01% of range, Vacuum ±0.1% of range 20000 psi, 1380 bar Media compatibility 10 inH2O, 1, 15, 30 psi: any clean dry non-corrosive gas 100, 300, 500, 1000 psi: any liquids or gases compatible with 316 stainless steel and above 1000 psi: any non-flammable, non-toxic, non-explosive, non-oxidizing liquid or gas compatible with 316 stainless steel. Mechanical Specifications Dimensions (H x W x D) 12.7 x 11.4 x 3.7 cm (5 x 4.5 x 1.5 in) Pressure connection ¼ in NPT Male Housing/Weight Cast ZNAL 0.56 kg (1.22 lb) with holster Display 5-1/2 digits, 16.53 mm (0.65 in) high 20-segment bar graph, 0 to 100% Power Three (3) AA alkaline batteries Battery life 1,500 hours without backlight (continuous on), 2,000 hours at slow sample rate read more

VISOPTIC - Digital Microscope Brand : Visoptic Model : ADSM301 Product Descriptions:  ADSM301 is a multifunctional digital microscope individually designed, developed and manufactured. It realized Full HD, high object distance, multifunction, multi-output at the same time. With help of the Andonstar measuring software, it can easily meet many different requirements in many industries, such as industrial overhaul and teaching demonstration. And it’s appearance design combines more ergonomic consideration, provides users better experience.  Technical Specifications:  Image sensor  3 Mega Pixels HD Sensor  Video output  1080P Full HD (via HDMI) ;720P (via PC)  Video format  MOV  Magnification ratio  Up to 260x (HDMI monitor 22 inch)  Photo resolution  12M  Photo format  JPEG  Focus range  5cm to 15cm  Frame rate  Max 30f/s under 600 Lus Brightness  Video-output interface    HDMI/AV  Storage  Micro-SD card, up to 32G (option)  PC support  Yes, for Windows XP/7/8/10, PC software with measurement (gift)  Power source  5V/2A  Stand size  20cm*12cm*17cm  Screen size  5 inch  Accessories  Stand*1, Power Adaptor*1, USB Cable*1, HDMI Cable*1, Manual*1, IR controller*1  Packing data  28*22*17cm/1.9kg read more

SMART SENSOR - Moisture Meter AS981 Brand : Smart Sensor Model : AS981 Product Features Compared with the traditional method, microwave measurement of moisture has a fast and accurate advantages. Apply on chemical industry, building materials, wood, paper, food, etc. The meter can also be used in the laboratory as the determination of moisture content. Technical Specification   Measurement Range 2%~70% Resolution 0.5% Accuracy ±(1%RH+0.5) Operation Condition 0°C~40°C Density Modes 4 Modes Low Battery Indication √ Packing Information Power 3*1.5V AAA Battery  Product Net Weight 210g Product Size 150*54*27mm   read more

KASUGA - Atmospheric Ion Monitor NK7001 Brand : Kasuga  Model : NK7001 Product Description A measuring device for checking the performance of an ionizer (static eliminator). Suitable for confirming its effects when operating and performing regular inspections afterward. Product Features · Includes a high-voltage power supply that lets you easily evaluate and manage ionizers at the touch of a button. · A small, separate detection probe lets you perform measurement in small spaces, such as when evaluating an ionizer installed inside a manufacturing device, and read the display results at your location. · Lets you evaluate devices of roughly the same size and electrostatic capacity. · Compact and portable, making it easy to carry it around the work area. · Provides high resolution in ±0.1 V steps, letting you evaluate and manage ion balance Technical Specification Detection method: Vibration-type static sensor -Attenuation property  + Time taken for reduction from 1,000V to 100V + Time taken for reduction from 200V to 20V Display range: ±0.1 - ±1999.9V ; 0.01 - 99.99sec Analog output: 0 - ±1000.0mV Measurement precision: Within ±5% + 5 counts -Power supply:  +4 AA alkaline batteries (15 hours or more of continuous operation) + AC100-240V (with AC power supply adapter) Dimensions: Main unit: 197×100×47mm Probe: 140×20×25mm Charge plate: 20 mm × 38 mm (stainless) Mass: Approx. 600 g (including probe and batteries) Accessories:  KSD-AC2 / AC power supply adapter (AC100-240V) KSD-REC / Analog output cable(length: 1,000 mm) read more

CEM INSTRUMENTS - Temperature & Humidity Data Logger Brand : CEM INSTRUMENTS Model : DT-172 Products Description  The CEM DT-172 is a smart data logger with internal sensors for both humidity and temperature. All values are shown in the display, that is present, max., min. and time. The logger is perfect for many different applications like office environment or temperature controlled transportation or clean rooms. The loggings are stamped with time and date and the large memory enables logging of 16,000 data sets. In the software alarms limits can be programmed and the loggings are easily transferred and printed as graph or list. The CEM DT-172 is delivered ready to use with battery, wall mount, software, USB cable and manual. Product Features   Records 32000 Data Points Built-in Sensor to measure Temperature & Humidity Freely selectable measuring cycle from 2 Sec to 24 Hours High Battery Life Displays all status information through two LED’s Download collected data through USB PC Interface Temperature Measurement in both Celsius and Fahrenheit Scales Alarm Display if user-defined maximum / minimum values are exceeded Analysis software used to view graph for logging data Software compatible to WINDOWS 7, 8, 8.1, 10 , 98, 2000, XP, VISTA 7 Technical Specification Relative Humidity Overall Range 0 to 100% Accuracy (0 to 20 and 80 to 100%) ±5.0% Accuracy (20 to 40 and 60 to 80%) ±3.5% Accuracy (40 to 60%) ±3.0% Temperature Overall Range -40 to 70°C (-40 to 158°F) Accuracy (-40 to -10°C and +40 to +70°C)  ±2°C Accuracy (-10 to +40°C)  ±1°C Accuracy (-40 to 14 and 104 to 158°F)  ±3.6°F Accuracy (+14 to 104°F)  ±1.8°F Resolution 0.1%RH, 0.1°C   Memory 32700 values   Measuring cycle  1s to 24h   Analysis software  2000 / XP / Vista read more

SANWA - Clamp Meter DCM 600DR Brand : Sanwa Model : DCM 600DR Product Description  Suitable for maintenance of vehicle,  hybrid vehicle, electric vehicle & DMM functions     Product Features   AC / DC current measurable max. 600A True RMS Peak hold ※When the peak button is pressed, the measuring 　　range will be fixed to the 600A range. Relative value measurement Data hold, Auto power save LCD with back light Sampling rate : 3 times / sec. for numeral display Technical Specifications  Function Measuring range Best accuracy Resolution Input impedance DCA 60/600A ±(2%+5) 0.01A   ACA 60/600A ±(2%+5) 0.01A DCV 600V ±(1%+2) 0.1V 1MΩ ACV 600V ±(1.2%+5) 0.1V Resistance 999.9Ω ±(1%+7) 0.1Ω   Continuity Buzzer sounds at less than 40Ω Open voltage: approx. 2.9V Sampling rate 3 times/sec. Bandwidth 50-500Hz Display 6000 Clamp diameter/Conductor size Φ30mm/10×50mm Battery LR03×2 Battery life Approx. 40 hrs. (Backlight off) Size/Mass H208×W69×D38mm/Approx. 260g Safety standards IEC61010 CAT.Ⅲ600V read more

MEMMERT - Universal Oven (UF750) Brand: Memmert Model: UF750  Product Descriptions: The universally aplicable lab oven U is Memmert's classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. Product Specifications:  Temperature Working temperature range at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature at +300°C Setting accuracy temperature up to 99.9°C: 0.1 / from 100°C: 0.5 Setting temperature range +20 to +300°C Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit Control Technology Language Setting  German, English, Spanish, French, Polish, Czech, Hungarian,  Control COCKPIT SingleDISPLAY, Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days Function Setpoint WAIT the process time does not start until the set temperature is reached Calibration three freely selectable temperature values Adjustable Parameters temperature (Celcius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime Ventilation Fan forced air circulation by 2 quiet air turbines, adjustable in 10% steps Fresh air Admixture of pre-heated fresh air by electronically adjustable air flap Vent vent connection with restrictor flap Communication Documentation programme stored in case of power failure Programming AtmoCONTROL software for reading out, managing organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand) Safety Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature Autodiagnostic system for fault analysis Standard equipment Internals 2 stainless steel grid(s), electropolished Works calibration certificate Calibration at 160°C Door fully insulated stainless steel doors with 2-point locking (compression door lock) Stainless steel interior Dimensions w(A) x h(B) x d(C) : 1040 x 1200 x 600 mm (d less 39 mm for fan) Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides Volume 749 l Max. number of internals 14 Max. loading of chamber 300 kg Max. loading per internal 30 kg Textured stainless steel casing Dimensions w(D) x h(E) x d(F) : 1224 x 1720 x 784 mm (d +58mm door handle) Installation on lockable castors Housing rear zinc-plated steel Electrical data Voltage Electrical load 400 V and 3x 320 V w/o neutral, 50/60 Hz approx. 7000 W Ambient conditions Set up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm. Altitude of installation max. 2,000 m above sea level Ambient temperature +5 °C to +40 °C Humidity rh max. 80%, non-condensing Overvoltage category II Pollution degree 2 read more