Protex Vortex A/C Cooler (8115, 8125, 8135, 8170) Brand : Vortec Model : 8115, 8125, 8135, 8170 Product Description ProtEX Vortex A/C Coolers are designed specifically for purged * Electrical enclosures in ATEX Zones 1 and 21, UL Class I, Div. 1 (Groups A,B,C and D), Class II, Div. 1 (Groups F and G), Class III and Temperature Class T3 areas. The ProtEX Vortex A/C incorporates the most up-to-date features into Vortec’s line of highly reliable, cost-effective enclosure coolers.The ProtEX Vortex A/C is available in 4 different cooling capacities; 900,1500,2500 and 5,000 BTU/hr. All of Vortec’s Enclosure Coolers keep Electrical and Electronic Enclosures cool, clean and protected and are a low cost alternative to expensive, high maintenance air conditioners; and avoid contamination with dirty, humid air caused by fans. Today’s small, compact multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and prone to premature failures. Excessive heat will cause digital displays to misread, controls to drift, and breakers to trip below rated loads. The result is productivity lost due to machine or line shutdowns. ProtEX Vortex A/Cs maintain a slight pressurization on the cabinet to keep electrical and electronic components clean and dry; and most are thermostatically controlled to maintain enclosure temperatures within a specified temperature range. Product Features   ATEX Certified Ex II 2 GD T3 UL Classified Class I Div. 1, Class II Div. 1 and Class III Ex h llC T3 Gb Ex h lllC T200C Db Ta +10 to 80C Tamb 10°C to 80°C (50°F to 175°F) 3 year warranty Small footprint to fit on all enclosures and in confined areas Top, side or front (door) mount models available Maintain temperature between 75 - 100 deg F Supplied with air filter and ducting kit Maintains slight pressurization in the enclosure Technical Specifications ating Thermostat System  Cooling Capacity BTU/hr Air Consumption Scfm Sound Level Item # Specs ProtEX* Mechanical System 900 15 60 dBA 8115   1500 25 66 dBA 8125   2500 35 72 dBA 8135   5000 70 75 dBA 8170   read more

Portable Digital Refractometer Brand: IMS Model: MSDR-P   Product Introduction: MSDR-P series refractometer using linear CMOS sensor with high precision and great repeatability.   The exterior shell is made of high-performance waterproof and anti-shock material. The product has low power consumption - one No. 7 battery supplies enough charge for 15,000 measurements.   This product is small and portable with a low price, and is suitable for daily health care, food and beverage industry procurement, medical care, automotive and other industries.     Technical Specification:   Measurement range MSDR_P_50：（Brix）0.0~50.0% MSDR_P_90：（Brix）0.0~90.0% Resolutions （Brix）0.1%   0.1°C Accuracy （Brix）±0.2%    ±0.5°C Environment  Temperature 0~40°C Measurement  Temperature 0~40°C（ATC） Sample volume  needed >0.2ml Measure tine 2S Power Supply 1×AAA battery Protection class IP67 for the sensor Dim/G.W 58(W)×25(D)×121(H)mm,90g(excluding battery   Series Model Scale's Name Scale's No. Range Resolution Accuracy Brix% MSDR-P-101 Brix S01 0.0--50.0% 0.1% ±0.2% Refractive Index  S02 1.3330--1.4200nD 0.0001nD ±0.0003nD MSDR-P-102 Brix S01 0.0--90.0% 0.1% ±0.2% Refractive Index  S02 1.3330--1.5177nD 0.0001nD ±0.0003nD MSDR-P-103 Dextran S01 0.0--10.6% 0.1% ±0.2% Refractive Index  S02 1.3330--1.4200nD 0.0001nD ±0.0003nD MSDR-P-104 Fructose S01 0.0--68.9% 0.1% ±0.2% Refractive Index  S02 1.3330--1.5177nD 0.0001nD ±0.0003nD MSDR-P-105 Glucose S01 0.0--59.9% 0.1% ±0.2% Refractive Index  S02 1.3330--1.5177nD 0.0001nD ±0.0003nD MSDR-P-106 Lactose S01 0.0--16.5% 0.1% ±0.2% Refractive Index  S02 1.3330--1.4200nD 0.0001nD ±0.0003nD MSDR-P-107 Maltose S01 0.0--15.6% 0.1% ±0.2% Refractive Index  S02 1.3330--1.4200nD 0.0001nD ±0.0003nD Salinity MSDR-P-201                                   (sodium   chloride NaCl) Salinity  S01 0.0--28.0% 0.1% ±0.2% Salinity  S02 0--280‰ 1‰ ±2‰ Specific gravity S03 1.000-1.217 0.001 ±0.002 Refractive Index  S04 1.3330--1.4200nD 0.0001nD ±0.0003nD MSDR-P-202                                               (sea water) Salinity  S01 0--100‰ 1‰ ±2‰ Chlorinity S02 0--57‰ 1‰ ±2‰ Specific gravity S03 1.000-1.070 0.001 ±0.002 Refractive Index  S04 1.3330--1.4200nD 0.0001nD ±0.0003nD Honey MSDR-P-301                                             Brix S01 0.0--90.0% 0.1% ±0.2% Water S02 38.0%-5.0% 0.1% ±0.2% Be' S03 33.0-48.0 0.1 ±0.2% Refractive Index  S04 1.3330--1.5177nD 0.0001nD ±0.0003nD Wine MSDR-P-401                                             Brix% S01 0.0-50.0% 0.1% ±0.2% %VOL ap S02 0.0-22.0% 0.1% ±0.2% Oe S03 0-150 1 ±2% KMW S04 0.0-25.0 0.1 ±0.2 Clinical MSDR-P-501                                             URINE   SP. G. S01 1.000-1.050 0.001 ±0.002 SERUM P. S02 -0.1-12.0 0.1 ±0.2 Refractive Index  S03 1.3330--1.4200nD 0.0001nD ±0.0003nD Car MSDR-P-601 Cleaner S01 read more

MITUTOYO - Digimatic Micrometer 293-344-30 Brand : Mitutoyo Model : 293-344-30 Product Description  This IP65 Micrometer offers outstanding accuracy, with and without data output, is highly robust and offers the following benefits: Oil-resistant material used for all plastic parts Extraordinary battery life of 2,4 years* Excellent resistance against water and dust enables this micrometer to be used in machining situations that include splashing coolant fluid. Technical Specifications Range: 0 - 1 [Inch] Parallelism: 0,00004'' Digital step: 0,00005''/0,001 mm Maximum Permissible Error J MPE: ±0,00005'' Measuring force: 5 - 10 N Mass: 280 g Display: LCD, character height 7.5 mm Measuring face: Carbide-tipped, micro-lap finish Measuring spindle: With spindle lock, ø6,35 mm, spindle pitch 0,5 mm Scale: Thimble and sleeve satin chrome finish, ø18 mm Power supply: 1 battery SR-44 Battery life: Approx. 2,4 years for models ≤4'' 1,2 years for >4'' 2 x PRESET (over 100 mm): Yes Inch-Metric: Inch/Metric Digital/Analog: Digital Battery life: Approx. 2,4 years Delivered: Including box, key, 1 battery, setting standard (from 1'' upward) certificate of inspection (0-2'' range)   Dimensions L: 0 mm a: 6,5 mm b: 25 mm c: 2.5 mm read more

SHIMPO – Digital Stroboscope DT-3011N Brand: Shimpo  Model: DT-3011N Product Description: The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source. Product Features: A wide measuring range The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm. Provided with a phase adjustment function It is possible to move an image while maintaining synchronization. The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals. Provided with a memory function The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time. Technical Specification: format DT-311N DT-315N Number of flashes (rpm) 40.0 to 35000 0 to 35000 in external sync mode Internal oscillation mode Display decomposition function 0.1: 40.0 ~ 5000 0.2: ~ 8000 0.5: ~ 10000 1: ~ 35000 Jump function Yes (Pressing the dedicated switch doubles or doubles the number of flashes) Integer function Yes (display decimals, do not set)　　　　　　　 Memory function Yes (The number of flashes when the power is turned off is memorized, and the number of flashes is used when the power is turned on next time) External sync mode input signal Voltage input H level: 2.5V to 12V L level: 0.8V MAX Pulse width 50μs or more Input impedance 10kΩ or more Speed ​​measurement function 40.0 to 35000 rpm (disabled during delayed emission) Delayed emission In the range of 40.0 to 10000 rpm, the　 delay angle can be set every 0 to 359 ° 1 °, or the delay time can be set every 0 to 2000 ms 1 ms. display 5-digit red LED 7 segment Synchronous output signal 12V voltage signal Pulse width approx. 400μs Setter Multi-turn encoder, tact switch Flash light source Xenon lamp Ramp input 10W power supply AC100-120V Rechargeable (dedicated Ni-Cd battery) Light emission for about 1 hour continuously or attached AC adapter g (quick charge for 2 hours) AC100V ± 10% Luminous timer Continuous lighting or stop emitting after a set time of 1 to 120 minutes Power output for sensor DC12V 40mA Power cord read more

MITUTOYO - Spindle Lifting Lever for S-Type Series 21AZB149 Brand : Mitutoyo Model : 21AZB149 Product Description The spindle lifting lever is attached to the top end of the spindle for improved inspection efficiency when using a dial indicator mounted on a stand. Product Features Remarks: Spindle lifting lever S-type dial indicators Series 2,3,4 up to 10 mm/0,4'' Functions: Spindle lifting lever read more

FLUKE 101 Digital Multimeter Brand : Fluke Model : 101 Product Descriptions Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians, and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice Product Features Basic dc accuracy 0.5% CAT III 600 V safety rated Diode and continuity test with buzzer Small lightweight design for one-handed use Rugged, durable design Automatic shutdown Battery is easy to replace Technical Specifications Electrical Specifications V AC (40-500Hz) Range 600.0 mV 6.000 V 60.00 V 600.0 V Resolution 0.1 mV 0.001 V 0.01 V 0.1 V Accuracy 3.0%±3 digit 1.0%±3 digit V DC Range 6.000 V 60.00 V 600.0 V Resolution 0.001 V 0.01 V 0.1 V Accuracy 0.5%±3 digit Resistance Ohms Range 400.0 Ω 4.000 kΩ 40.00 kΩ 400.0 kΩ 4.000 MΩ 40.00 MΩ Resolution 0.1 Ω 0.001 kΩ 0.01 kΩ 0.1 kΩ 0.001 MΩ 0.01 MΩ Accuracy 0.5 %±3 digit 0.5 %±2 digit 0.5 %±2 digit 0.5 %±2 digit 0.5 %±2 digit 1.5%±3 digit Capacitance Range 50.00 nF 500.0 nF 5.000 μF 50.00 μF 100.0 μF Resolution 0.01 nF 0.1 nF 0.001 μF 0.01 μF 0.1 μF Frequency  (10 Hz – 100 kHz) Range 50.00 Hz 500.0 Hz 5.000 kHz 50.00 kHz 100.0 kHz Resolution 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz Duty Cycle Range 0.1 % to 99.9 % Resolution 0.1 % General Specifications CAT Rating CAT III 600 V V AC Range 600.0 V V DC Range 600.0 V Ohms Range 40.00 MΩ Auto Shutoff Y Continuity Y Capacitor 100.0 μF Frequency 100.0 kHz Hold No Duty Cycle Yes Size 130 mm x 65 mm x 27mm  Weight 160 g Battery Two AAA Warranty 1 year Environmental Specifications Operating Temperature 0 °C to +40 °C Storage Temperature -30 °C to +60 °C Operating Humidity Non condensing (<10 °C) <=90% RH (at 10 °C to 30 °C) <=75% RH (at 30 °C to 40 °C) (Without Condensation) Operating Humidity, 40 MΩ 80% RH 10 °C to 30 °C, 70% RH 30 °C to 40 °C Operating Altitude 2,000 meters Storage Altitude 12,000 meters IP Rating IP 40 per IEC 60529 Vibration Requirements MIL-PRF-28800F, Class 2 Drop Test Requirements -10°C and 1 meter to surface, per IEC-61010-1, and Fluke SOP 39.1 for portable Hand-held equipment Shipping container drop per Fluke SOP 39. EMI, RFI, EMC Must meet all applicable requirements in  IEC/EN 61326-1 Absorption/Corrosion Per Fluke SOP 39.1 Temperature Coefficients Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 ºC   read more

FLUKE - Non Contact Voltage Tester 1AC-A-11 Brand : Fluke Model : 1AC-A-11 Product Description The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet. Product Features Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected Continuous self-test so you always know it’s working Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC Audible/Silent mode for added convenience Technical Specification Specifications Operating Principles Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Voltage sensing ranges Nominally, 90 V AC to 1000 V AC Detector tip style Flat-tip Light source One high intensity red LED Agency Approvals ‍‍‍ Safety IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V EMC IEC 61326-1: Portable IP Rating IP 40 Operating Temperature -10°C to 50°C (-14°F to 122°F) Operating Humidity Ranges 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40 to 55°C) Operating Altitude 3000 m Cleaning Clean with damp cloth Batteries 2 AAA alkaline batteries included Battery Life Typical battery life of greater than 1 year Warranty Period Two years read more

INSIZE - Digital Moisture Meter 9341-50 Brand: Insize Model: 9341-50 Product Features:  Suitable for wood, smooth cement, hard gypsum, mixed mortar, brick, etc. Measure moisture, temperature and relative humidity. Temperature type: ambient, dew point, wet bulb. Maximum and minimum modes. Automatic power off. Technical Specification:   Measuring Depth 0~50mm Measuring range Moisture 0~60% Temperature -10~50°C/14~122°F Relative humidity 0~100%RH Accuracy Moisture ±2% Temperature ±2% Relative humidity ±5%RH Resolution Moisture 0.1% Temperature 0.1°C/0.1°F Relative humidity 0.1%RH Sampling time 0.5s for moisture 1s for temperature and relative humidity Power supply 2xAAA batteries Dimension 130x56x29mm Weight 206g   Main Unit 1 PC Battery (AAA) 2 PCS read more