NOVOTEST - Coating Thickness Gauge TP-2020 Brand : Novotest Model : TP-2020 Product Desription Coating thickness gauge NOVOTEST TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dewpoint temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge). Product Features Measures coating thickness on ferrous (Fe) and non-ferrous (nFe) metals Automatic sensor detection Wide range of sensors for different tasks Selecting units of measure Storing individual calibrations in probes memory Average calculation, minimum and maximum indication High measurement accuracy Transfer of measurement data to PC via usb Portability Large buttons Enlarged screen Shockproof housing with a special protective silicone bumper case Charge control Technical Specification Thickness measurement range(depends on probe type) 0 µm … 60 mm Measured parameter coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature Measuring units μm, mm, inch, mil Revision modes calculation of average, indication of minimum and maximum PC connection yes Menu languages English, Spanish, French, Russian Dimensions, mm 122x60x25 Operating temperature range, ° C -20 … +40 ° C Batteries 2 AA Type of connectors of probes Lemo Storage of measurement results and PC software (optional) 256 Standards AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32, ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159 Time of continuous work hours, not less 20 Weight of electronic unit with batteries, no more, kg 0.2 Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020 Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys) Type of probe Coating thickness measurement range Measurement accuracy Dimensions of the probe, mm Purpose probe F-0,3 0-300 μm ±(0,03h+0,001) mm Ø5×40 Measurement of paint, varnish and galvanic coatings probe F-0,5 0-500 μm ±(0,03h+0,001) mm Ø 8×15 probe F-2 0-2000 μm ±(0,03h+0,002) mm Ø 10×35 Measurement of paint and varnish coatings probe F-5 0-5000 μm ±(0,03h+0,002) mm Ø 18×40 Measurement of paint, varnish and mastic coatings Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys) probe NF-2 0-2000 μm ±(0,03h+0,002) mm Ø 12×35 Measurement of anodic-oxide films and paint coatings Thick coatings on metals (dielectric coatings on metals) probe M-12 0-12 mm ±(0,03h+0,02) mm Ø 15×50 Measurement of mastic coatings probe M-30 0-30 mm ±(0,03h+0,03) mm Ø 40×50 probe M-60 0-60 mm ±(0,03h+0,05) mm Ø 70×60 Measurement of surface roughness, Rz (After abrasive blasting pre-painting work) probe DSH 2-300 μm ±(0,03h+0,002) mm Ø 18×40 Measurement of surface roughness after sand and shot blasting Temperature, humidity and dew point probe DT -50 … +80 ° C + / – 1 ° C Ø 12×107 Temperature measurement probe DTVR Humidity: 0 – 100% Temperature: -50 … 80 °C Dew point: -15 – +40 °C ± 5% ± 1 ° C ± 2 ° C Ø 50×120 Measurement of temperature, humidity and dew point Magnetic Properties Chart:
read more