Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Hardness Testing
Sep 21, 2022 at 12:18 pm —
TIME - Concrete Test Hammer (TC500N)

TIME - Concrete Test Hammer (TC500N)

TIME - Concrete Test Hammer (TC500N) Brand: TIME Model: TC500N Product Descriptions: TC500N is a portable instrument to test the compressive strength of concrete structures or rock in non-destructive testing field. The type-N hammer is designed for measuring concrete thickness 100mm or more, or concrete with a maximum particle size no more than 32mm. Product Features: Suitable for testing a wide variety of concrete, rock and bricks. Light, flexible and simple operation. Friction adjusted by the pointer. Adopt stretching techniques to let the button work well. Supplied with carborundum stone to prepare test surface. Technical Specifications: Measuring range 10 to 70 N/mm2 Impact energy 2.207 Nm Spring extension 75 ± 0.3 mm Friction of pointer system 0.65 ± 0.15 N Length of pointer 20.0 ± 0.2 mm RAdius of spherical tip 25 ± 1.0 mm Working length of the spring 61.5 ± 0.3 mm Mean value of steel-anvil rating 80 ± 2 Flip tension spring rigidity 785.0 ± 40.0 N/m Operating temperature 0℃ ~ +40℃ Strorage temperature -10℃ ~ +50℃ Dimensions Hammer: 280 mm x Φ60 mm With case: 320 mm x 170 mm x 86 mm Weight Hammer: 1.0 kg With case: 4 kg read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Water Analysis Meter
Sep 20, 2022 at 12:22 pm —
HACH - Pocket Pro and Pocket Pro+ Testers (95310000)

HACH - Pocket Pro and Pocket Pro+ Testers (95310000)

HACH - Pocket Pro and Pocket Pro+ Testers (95310000) Brand: Hach Model: 95310000 Product Descriptions: Pocket Pro and Pocket Pro+ testers measure electrochemical parameters in a broad range of water applications. The family of 12 testers offers convenient portable solutions for pH, ORP, conductivity, TDS, salinity, and temperature, delivering accurate results you can be confident in. The Pocket Pro+ testers take the value a step further with replaceable sensors, powerful backlight, and multi-parameter tester options.   Product Features: Confidence in Results - Easy calibration steps and built-in diagnostics for pH testers take the guesswork out if calibrating the sensor to keep it in optimum conditions. Save Time and Money - Easy to replace AAA batteries and a convenient sample cup make maintenance and measurement simple. Easy of Use - The large LCD screen is easy to read; backlighting is included on Pocket Pro+ models, allowing measurement in almost any lighting environment.  Technical Specifications: Accuracy 0.1 pH Backlight No Battery Life 200 Battery Requirements 4, AAA Calibration 3 points IP Rating IP67 Manual Languages English, French, German, Italian, Spanish Operating Temperature Range 0 - 50°C Parameter pH, Temp Power Supply Batteries (seee Battery Requirements) Range 0.0 to 14.0 pH Resolution 0.1 pH Sample Volume 7 mL Warranty 12 months What's included Tester, 4 AAA batteries, lanyard, calibration solution and quick start guide. read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Temperature, Humidity & Moisture
Sep 14, 2022 at 05:24 pm —
METTLER TOLEDO - Halogen Moisture Analyzer (HE53)

METTLER TOLEDO - Halogen Moisture Analyzer (HE53)

METTLER TOLEDO - Halogen Moisture Analyzer (HE53) Brand: Mettler Toledo Model: HE53 Product Descriptions: The HE53 halogen moisture analyzer is a robust and affordable instrument for determining the moisture content of common everyday samples. With on-screen assistance and easy 3-step moisture measurement process, it is simple to use, even for untrained operators. It is perfect for when you have a tight budget but require reliable performance.  Product Features: Reliable results Intuitive operation Easy printer connection Bright, Clear Display: - thanks to large numbers and the brilliant LCD display, information and results are easy to read in all lighting conditions. Simple 3-Steps Operation - So straightforward everyone can perform moisture analysis: 1. Tare the empty weighing pan 2. Evenly distribute the sample 3. Press start and see the result in just a few minutes Affordable Quality - The HE53 provides excellent value for money with halogen drying technology and a high performance weighing unit. Rugged Construction - With a robust metal housing and easy-to-clean stainless stee; surgace, the HE53 has been designed to provide you with years of reliable service. Technical Specifications: Repeatability 0.15% with 2 g sample 0.05% with 10 g sample Drying Programs Standard, Rapid Readability 1 mg, 0.01% MC Method Memory 1 Results Storage 1 Recommended %MC 1.0 – 100% MC Switch-Off Criteria 1 automatic, timed (1-120 min) Drying Temperature 50 - 160 °C (1°C increments) Test and Adjust Temperature adjustment 100°C / 160°C External test weight 50 g Display Modes %MC, %Dc, %AM, %AD, g Interfaces RS232 Capacity 54 g Display Backlit LCD Dimensions (W x D x H) 183 x 334 x 161 mm (341 mm cover open) read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Sep 14, 2022 at 12:38 pm —
FLUKE - 600A TRMS AC/DC Clamp

FLUKE - 600A TRMS AC/DC Clamp

FLUKE - 600A TRMS AC/DC Clamp Brand: Fluke Model: Fluke-375 Product Descriptions: The new Fluke 370 FC Series (376 FC, 375 FC and 374 FC) offers advanced troubleshooting performance. The iFlex® flexible current probe allows easy connections to wires in tight spaces. In addition, all three clamps are now part of the Fluke Connect® family of wireless test tools. This includes: Long and trend measurements to pinpoint intermittent faults Transmit result wirelessly via Fluke Connect® Measurements app Create and send reports right from the field Capture measurements outside the arc flash zone with Bluetooth connectivity to your Apple or Android devices Product Highlights: Connect your meter to your smartphone using Fluke Connect Measurements app to increase the troubleshooting power of your clamp Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks Record results directly to your phone and the Fluke CloudTM  Capture the intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC and 375 FC Create and share reports from the field via email, or converse in real time with ShareLiveTM video calls iFlex flexible current probe expands the measurement range to 2500A ac; provides access to large conductors in tight spaces (included with 376 FC; compatible with 375 FC and 374 FC) TPAK magnetic hanging strap (included with 376 FC; compatible with 375 FC and 374 FC) allows you to conveniently hang the meter while using the probes Integrated VFD low pass filter (Fluke 376 FC and 375 FC) for accurate motor drive measurements Proprietary in-rush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it CAT IV 600V, CAT III 1000V safety rating 3 year warranty Soft-carrying case Measurement Capability 1000A ac and dc current measurement (376 FC); 600A ac and dc (375 FC and 364 FC) 2500A ac current measurement with iFlex® flexible current probe 1000V ac and dc voltage measurement  True-rms voltage and current for accurate measurements on non-linear signals Frequency measurements to 500Hz with body jaw and iFlex (376 FC and 375 FC), with continuity detection Min, max, average and in-rush recording to capture variations automatically 500mV dc measurement range to interface with other accessories (376 FC and 375 FC) 1000 μF capacitance measurement Product Features: 500mV DC measurement range to interface with other accessories Frequency measurement  Low pass filter for stable readings in noisy environments Product Specifications: ATTRIBUTE VALUE Absolute Maximum AC Current Measurement 600 A Absolute Maximum DC Current Measurement 600 A Absolute Maximum AC Voltage Measurement 600 V Absolute Maximum DC Voltage Measurement 600 V Absolute Maximum Resistance Measurement 6 kΩ Model Number 375 AC Current Measurement Resolution 0.1 A DC Current Measurement Resolution 0.1 A Best DC Current Accuracy 2% Clamp Meter Type AC/DC Clamp Meter Best AC Current Accuracy 2% Best AC Voltage Accuracy 1.5% Best DC Voltage Accuracy 1% Functions Measured AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance True RMS Yes Height 246 mm Minimum Operating Temperature +10°C DC Voltage Measurement Resolution 0.1 V Dimensions 83 x 43 x 246 mm Length 83 mm Width 43 mm Power Source Battery Maximum Operating Temperature +50°C Display Type Backlight Best Resistance Measurement Accuracy 1% Resistance Measurement Resolution 100 mΩ Safety Category Voltage 600 V, 1000 V Battery Type AA Safety Category CAT III 1000 V, CAT IV 600 V Weight 388 g Jaw Capacity Busbars 34 mm Safety Category Level CAT III, CAT IV AC Voltage Measurement Resolution 0.1 V read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Weighing
Sep 13, 2022 at 11:47 am —
SHIMADZU - Analytical Balances (ATY224R)

SHIMADZU - Analytical Balances (ATY224R)

SHIMADZU - Analytical Balances (ATY224R) Brand: Shimadzu - Japan Model: ATY224R Product Descriptions: High Accuracy Sample Measurements from Exceptional Readability - Capable of discerning sample mass variation through a 0.1 mg readability and introducing user-oriented and versatile weighing, the ATY224R Analytical Balance from Shimadzu is suitable for standard and sample preparations. Unequalled Repeatability for Dependable Measurement Values - The Shimadzu ATY224 balance renders identical measurement values even with multi user managing the unit thanks to its 0.1 mg repeatability. Offering this kind of reproducibility while at the same time following similar weighing conditions, the Shimadzu ATY224 makes way for trouble-free sample measurement analysis because it saves time especially when documenting measurement values. Revolutionary Weighing from Laboratory to Field - Weigh substances ranging from solids to liquids, tissues and more with the Shimadzu ATY224 equipped with a 91 mm pan, capable of supporting a max capacity of 220g. Securing weighing accuracy and precision is not a problem with the model's external calibration feature, allowing manual calibration weights using approved calibration weights. This option makes it more economical compared to self-calibrating balances.  Noteworthy Features for Better Weighing  Alpha Numeric LCD - Designed with a bright Alpha Numeric LCD, the Shimadzu ATY224 permits users to check and read measurements from any angle, with all lighting conditions considered.  Greater Efficiency Right at Your Hand - Rack up faster weighing results for amplified lab workflows through the ATY224 Analytical Balance from Shimadzu with 3 seconds stabilization time. You can instantly send acquired record to devices as the balance is geared with RS-232 and USB interfaces and ports. Product Features:  Easy Settings Enable Responsiveness and Stability to be Freely Changed  Responsiveness becomes very important when weighing fixed amounts of powders and liquids. On the other hand, stability is required when weighing substances in environments subject to drafts or vibrations. The AT-R balances are equipped with a 5-stage indicator. It is easy to switch between a response focus (R) and a stability focus (S) during measurements. Equipped with Two Interfaces: USB and RS232C The balances are equipped as standard with two convenient interfaces for connection with a computer or PLC (programmable logic controller). Human error can be prevented by direct transfer of weight values to the computer. The balances have been shown to operate with the following PLCs from major companies. - Mitsubishi Electric Q Series - OMRON CJ2 Series - Keyence KV-800 - IDEC FC6A Series Addition of an Ionizer Increases Measurement Reliability The optional STABLO™-AP ionizer (static remover) quickly removes static from samples and containers, without creating a draft. This prevents reproducibility errors and flunctuations in measurement values due to static electricity. The static elimination can be enhanced by placing flasks in the AP Holder (sold separately). AT-R Series Specifications: read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Electrostatics (ESD) , Ionizer & Resistivity Meter
Sep 12, 2022 at 05:04 pm —
SIMCO - Electrostatic Field (ESD) Meter (FMX-004)

SIMCO - Electrostatic Field (ESD) Meter (FMX-004)

SIMCO - FMX-004 Electrostatic Field (ESD) Meter  Brand: Simco Model: FMX-004 Product Descriptions: The FMX-004 fieldmeter is a compact electrostatic fieldmeter used for locating and measuring static chargs. Its pocket size and three-button operation makes it convenient and easy to use. The FMX-004 also offers an optional cable and bracket kit for Analog output. This feature allows you to extract and monitor your data. The Analog output bracket enables the fieldmeter to be mounted in order to collect continous reading. The Analog signal can be use with a PLC, data acquisition card, data logger, chart reader and etc. Product Features:  Lightweight, compact design Range light assures accurate and repeatable measurements Automatic range switching up to ±30 kV (30,000V) at a distance of 1'' Digital and bar graph display with +/- indicators Automatic power off with inactivity​  Technical Specifications: Display Features Push button POWER, HOLD, ZERO and MODE Read Out Bar graph-red LCD for positive polarity voltage; blue LCD for negative polarity voltage; battery capacity and error display indicators Measurement Capacity AUTO: 0 - ±1.49 kV (low-range); ±1.0 kV to ±30.0 kV (hi range) HI Range : 0 - ±30.0 kV LOW Range : 0 - ±3.00 kV Ion Balance: 0 - ±300V Measuring Distance 1'' ± 1/64'' (25mm ± 0.5mm); LEDs guide for correct distance (between charged object and fieldmeter) Power 9V , 6F22Y manganese battery Dimensions 4 7/8'' L x 2 7/8'' W x 1''H (6 oz) read more
Carlssoon Technologies (Malaysia) Sdn Bhd added 2 new photos in Temperature, Humidity & Moisture
Sep 12, 2022 at 10:22 am —
TFA - Digital Thermo-Hygrometer (30.5002)
CENTER - Laser Sighting Infrared Thermometer (CENTER350)
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Electrical & Electronic Meter
Sep 9, 2022 at 04:30 pm —
KOWA SEIKI - Noise Catcher (KEK 7-1)

KOWA SEIKI - Noise Catcher (KEK 7-1)

KOWA SEIKI - Noise Catcher (KEK 7-1) Brand: Kowa Seiki Model: KEK 7-1 Product Descriptions:  Main unit dimensions: Length 100mm, Width 160mm, Thickness 50mm Power Supply: AA batteries / 8 pcs Components: Magnet sensor (L/R), 1 set Magnet & Clip Sensor (L/R), 1 set Magnet & Clip sensor (L/R), 1 set Extension cord 3m (L/R), 1 set Headphone, 1 piece case, 1 pc AA battery / 8 pcs Product Features: In order to limit the noise, it is necessary to distinguish the sound generated by each sensor By pressing the button once, you can switch the sound generated by each sensor 10 LEDs each on the right and left (2 colors) to easily determine the source of the noise With auto power off function to prevent forgetting to turn off Sensor Features: [1] Magnetic sensor - It can be used in places where magnet & clip sensors cannot be used or in small spaces [2] Magnet & Clip sensor clip can be directly clipped to the body - If you cannot fit it, you can use the magnet to attach it to the body. read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Temperature, Humidity & Moisture
Sep 9, 2022 at 12:21 pm —
HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range)

HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range)

HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range)  Brand: Hanna Instruments Model: HI98130 Product Descriptions: HI 98130 is a waterproof pH/EC/TDS/temperature meters. The housing has been completely sealed against humidity and designed to float. All pH and EC/TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in °C or °F units. For EC/TDS readings, the EC/TDS conversion factor (CONV) is selectable by the user, as well as the temperature compensation coeffcicient β (BETA). The meters can be calibrated at one or two points for pH (with auto-buffer recognition and against five memorized buffer values), and at one point for EC. Measurements are highly accurate with a unique stability indicator right on the LCD. These meters are also provided with battery level indication at start-up, and with a low battery symbol which warns the user when the batteries need to be replaced. In addition the Battery Error Prevention System (BEPS) avoids erroneous reading caused by low voltage level by turning the meter off. Product Features: 3 sensors in a single meter pH electrode with extractable junction Amperometric EC/TDS sensor Exposed temperature probe for faster EC/TDS readings Waterproof Designed to float if accidently dropped in sample Wide pH Range pH range is from 0.00 to 14.00 pH Selectable EC to TDS conversion factor Choice of either 1 0.45 or 1.0 conversion factor Automatic Temperature Compensation All readings are compensated for variations in temperature Temperature displayed in °C or °F along with pH, EC, or TDS reading Stability Indicator Meter displays a clock tag that will disappear when the reading has achieved stability Hold Button Freezes reading on the display to allow recording of measurement BEPS (Battery Error Prevention System) Meter will automatically shut off if there is not enough power to get an accurate measurement Battery % level at startup Low Battery Indicator When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition Auto-off Auto-off feature automatically shuts off meter after 8 minutes of non-use to maximize battery life Product Specifications: pH Range 0.0 to 14.0 pH pH Resolution 0.01 pH pH Accuracy ±0.05 pH Conductivity Range 0.00 to 20.00 mS/cm Conductivity Resolution 0.01 mS/cm Conductivity Accuracy ±2% F.S. TDS Range 0.00 to 10.00 ppt (g/L) TDS Resolution 0.01 ppt (g/L) TDS Accuracy ±2% F.S. Temperature Range 0.0 to 60.0°C / 32.0 to 140.0°F Temperature Resolution 0.1°C / 0.1°F Temperature Accuracy ±0.5°C /±1°F EC/TDS Calibration Automatic, one-point at: 12.88 mS/cm, 6.44 ppt (g/L) pH Calibration Automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18) Temperature Compensation pH: automatic; EC/TDS: automatic with β adjustable from 0.0 to 2.4% / °C TDS Conversion Factor 0.45 to 1.00 pH Electrode HI73127 (replaceable; included) Battery Type/Life 1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use Environment 0 to 50°C (32 to 122°F); RH max 100% Dimensions 163 x 40 x 26 mm (6.4 x 1.6 x 1.0”) Weight 100 g (3.5 oz) Ordering Information HI98130 is supplied with HI73127 pH electrode and HI73128 electrode removal tool, batteries (4 x 1.5V) and instructions. read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Electrical & Electronic Meter
Sep 9, 2022 at 10:28 am —
MULTICOMP - Surface Resistance Meter

MULTICOMP - Surface Resistance Meter

MULTICOMP - Surface Resistance Meter Brand: Multi Comp Pro Part No: MP005768 Product Descriptions: The Multicomp Pro MP005768 surface resistance meter has been designed to measure both surface resistance and resistance to ground. To measure surface material place the meter on the area to be tested and press the test button. For measuring resistance to ground, place the ground lead into the earth leakage socket, connect the crocodile clip to the area to be tested and press the button. The meter will test conductive, static dissipative and insulative surfaces using two parallel bars set to give Ohms per square readings. Conductive is indicated by green LEDs from 103 - 105, static dissipative by yellow LEDs from 106 - 1011 and insulative by re LEDs 1012+. Product Features: Tests conductive, static dissipative and insulative surfaces using two parallel bars Conductive is indicated by green LEDs Static dissipative by yellow LEDS from 106-1011 Insulative by red LEDs from 1012+ Operating temperature range from 5-19°C Requires 9V, PP3 battery (not supplied) Test Voltage of 9V Accuracy of -/+ 10% Repeatability of -/+ 5% 6oz device weight Technical Specifications: Technical Specification Technical Data Decade Changeover +/- ½ Decade on a Logarithmic Scale (3.16 x 10n) Resolution 1 Decade Accuracy +/- ½ Decade Temperature Operating 5°C to 49°C Storage -15°C to +60°C Power 9V PP3 Alkaline Battery Test Voltage Nominal 9V Accuracy +/- 10% Repeatability +/- 5% Weight 6 Ounces read more
next page