PCE - Differential Pressure Gauge (PCE-BDP 10) With Bluetooth Brand: PCE Instruments Model: PCE-BDP 10 Product Descriptions: The Bluetooth differential pressure gauge PCE-BDP 10 is used to quickly and easily check the differential pressure. The Bluetooth differential pressure gauge finds its application, for example, in the ventilation and air conditioning technology with the help of a smartphone to measure the gas flow pressure or static pressure. Also, the Bluetooth differential pressure gauge can be used to check for pressure drops. Here is in the app of the differential pressure gauge, a graphical display available. The measurement data can be sent by email for further processing. In order to use the differential pressure gauge without a Bluetooth smartphone, the meter is equipped with a display. Thus, the Bluetooth differential pressure gauge is also self-sufficient. The PCE-BDP 10 may represent the differential pressure readings 11 units. The measuring range extends from -2 ... 2 PSI (± 137.9 mbar / hPa). Product Features: Android and iOS app Bluetooth interface ± 2 PSI measuring range 11 different units LC display Plug nipple connection Technical Specifications: Measuring range ± 2 PSI Measurement accuracy          ± 0.006 PSI (0 ... 0.2 PSI)   ± (0.006 PSI + 1.5% of Mw) (> 0.2 PSI) Resolution 0.001 PSI Display units Bar, PSI, mbar, kPa, inH20, cmH2O,   ozin2, inHg, mmHg, kg / cm², ftH2O Medium Air Connection Plug nipple for direct   hose connection Automatic shutdown     15 minutes Power supply 4 x 1.5V AAA batteries Operating conditions 0 ... 50°C / 32 ... 122°F Location conditions -10 ... 60°C / 14 ... 140°F Dimensions 178 x 38 x 24 mm / 7 x 1.5 x 0.9 in Weight About 70 g / < 1 lb without batteries What's Included: 1 x Bluetooth differential pressure gauge PCP-BDP 10 2 x Connecting hose 3.5 x 3 mm 1 x Adapter piece to 1/4'' 4 x 1.5V AAA battery 1 x User manual read more

TIME - DJ Series Holiday Tester  Brand: TIME Model: DJ Series  Product Descriptions: DJ series are designed for quick inspecting a wide range of non-conductive coatings and linings for pinholes, porosity and other faults by means of pulsed voltage in the non-destructive testing field. It is widely used in the petro-chemical, pipe mills, plastic fabrication and aerospace industries. Product Features: Display of output high voltage directly Clear LCD with blue backlight Switch off automatically  State of charge indicator DJ-6(A): mainly used for the antisepsis of pottery DJ-6(B): mainly used for petroleum pipeline (high voltage) DJ-9: displays leakage points of antisepsis coating on two digits Technical Specifications: read more

ELITECH - TLOG 10 SERIES DATA LOGGERS (10EH/10H/10EH) Brand: ELITECH Model: Tlog 10EH / 10H / 10EH Product Descriptions: Tlog 10 series data loggers can be widely used in each stage of storage and cold chain logistics, such as refrigerated containers/trucks, cooler bags, cooling cabinets, medical cabinets, freezers, and laboratories. The loggers feature an LCD screen and two buttons design. They support various start and stop modes, multiple threshold settings, two storage modes (stop when full G cyclic record) and PDF report automatically generated for users to check data without using software. Product Features: Small size, LCD screen and two buttons design 32000 point memory, PDF report, USB port IP 65 protect class With optional internal/external temperature or humidity sensor Technical Specifications: read more

PCE - Torque Meter (PCE-DFG N 100TW) Brand: PCE Instruments Model: PCE-DFG N 100TW Product Descriptions: The torque wrench tester consists of a handheld measuring device and an external torque transducer. The torsion transducer is connected to the hand-held device via a 1.5m / 4.9 ft long cable and thus enables installation in a test stand or directly assembly on a test bench. The torque measuring device is delivered adjusted so that the control measurements can be started immediately. A calibration certificate is optionally available for the torque measuring device. This certificate is a target / actual comparison on a traceable reference standard and thus serves as proof of the measurement accuracy. The measurement uncertainty of the torque measuring devvice is only 0.5% of the measuring range. The torque measuring device is therefore used as a reference device for testing and adjusting static torque tools. A screw latch is essential for dynamic torques. The torque transducer has a 1/2'' square socket and can perform the torsion measurements in both directions of rotation. With a sampling rate of 1600 Hz, the torque meter reliably detects the first and the maximum torsional moment peak (PEAK). The release moment ('' click '') is shown separately in the display and can be deleted either manually or automatically after a set time has elapsed. Thanks to freely adjustable alarm values, the torque measuring device can warn the tester of overload of the torque tool if it does not trigger itself. For a more detailed analysis of the torsional forces, the PC software included in the scope of delivery can be used. Product Features:  Left / right torsion measurement 1600 Hz sampling rate Error limit 0.5% of the measuring range PEAK / Hold function Graphic display PC software Power adapter and battery operation possible Technical Specifications: read more

PCE - Durometer / Dynamometer (PCE-PFG 500) Brand: PCE Instruments Model: PCE-PFG 500 Product Descriptions: The PCE-PFG Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The force measuring device offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements. The measurement data and a statistical evaluation of the data stored in the Durometer (MIN / MAX / Average) are shown on the graphic display and can be transferred to a PC via the USB interface. In addition, the force measuring device offers a limit value function MIN / MAX, which can switch a multi-covered LED (yellow / green / red) and switching contacts. The graphic display can be rotated and the Durometer can be securely attached to a test stand using the M4 threaded holes on the back. The force is introduced into the internally installed load cell via an M6 threaded rod. Various mounting pieces are included in the scope of delivery of the force measuring device. The force measuring device can be operated continously for up to 36 hours on a single charge (without background lighting) and a reliable partner as a mobile force measuring device. Product Features: 4 measurement modes (real-time measurement / maximum value / average measurement / automatic memory measurement) Internal memory for up to 100 measured values Statistics evaluation (MIN / MAX / Average) Rotatable display Alarm function with multi-colored LED (yellow / green / red) and switching contact output 2.85V. USB B interface Battery life up to 36 hours. Technical Specifications: What's Included: 1 x Durometer PCE-PFG 500 1 x flat head adapter Ø13 mm 1 x pointed head adapter 1 x hook adapter 1 x extension rod (75 mm) 1 x USB cable 1 x USB charger 1 x instruction manual 1 x plastic carrying case  read more