Automatic Bursting Strength Testing Machine Brand: Rankconn Instruments Model: RC-602 Product Introduction: In line with the relevant standards, the pneumatic clamping sample is adopted, and the liquid crystal display is suitable for the determination of the burst resistance of cardboard, corrugated cardboard and other sheet plates.   Features: Once the cardboard is crushed, it will automatically stops and returns to the initial position; Fully automatic one-button operation; It can store 40 sets of data at the same time; Equipped with micro printing, test results can be printed; Equipped with an emergency stop button to improve operation safety; Equipped with air pressure gauge to monitor pressure at any time; High-definition LCD Touch Screen display Standards: ISO 2759          : Determination of the bursting resistance of cardboard; GB/T 1539       : Determination of the bursting resistance of cardboard； QB/T 1057       : Paper & Cardboard Burst Resistance Tester Main technical parameters: Model RC-602 Induction method Pressure converters Savings results With printing function, 10 sets of data can be printed to automatically calculate the average value Display High-definition LCD screen display, digital A/D value advance rate of 100 times/s, high test accuracy Strength Units kgf/cm2 、Lbf/in2 、 Kpa、Pa、MPa (with unit switching function) Measuring Range 250～5600kPa Resolution 1kPa Measurement Accuracy Indication error Better than ±1% F.S Variability of the indication Better than ±1% Hydraulic speed High pressure type: 170±10ml/min Adhesive film resistance bulge10mm，170kPa～220kPa bulge 18mm，250kPa～350kPa Clamp ring material stainless steel Gripping force >690Kpa (adjustable) Inner diameter of the upper clamp ring hole φ（31.5±0.05）mm Inner diameter of the lower clamp ring hole φ（31.5±0.05）mm Upper chuck diameter: 95mm Lower chuck diameter: 135mm Hydraulic oil Silicone oil Machine Dimension 465*465*500mm Weight Approx. 67KG Power supply AC220V Standard configuration 2 pieces of rubber film, 1 wrench, 1 pack of correction tablets, 1 bottle of silicone oil, and 1 rubber hammer read more

LINSHANG LS136 - UV Energy Meter Brand: Linshang Model: LS136   Product Features: Suitable for high pressure mercury lamp For high pressure mercury lamp, halogen lamp 7.6mm thickness and 102mm diameter, simple operation Long-term for high temperature resistance   Product Description: LS136 UV energy meter is a professional ultraviolet measurement tool for detecting UV energy and intensity in high pressure mercury lamp, halogen lamp and other light sources. It can be used to measure UV intensity, energy and temperature in a variety of UV curing machine, UV coating machine, exposure machine, dryer, printing machine and other equipment. The UV energy meter can be measured in narrow spaces with 7.6mm thick. Equipped with a high temperature protective cover, still operate in high temperature environment.   LS136 UV energy meter is specialized for high pressure mercury lamp halogen lamp and other light source, if you need to measure UVLED light source, please choose LS137 UV energy meter.     Technical Specification: Parameter LS136 UV Meter Spectral range 315nm-400nm, λp = 365nm Power measuring range 0-2000mW/cm² Power resolution 0.1mW/cm² Energy measuring range 0-999999mJ/cm² Measuring accuracy (H is the standard value) H<5mW/cm²：±0.5mW/cm² H>=5mW/cm²：±10%H, ±5% (typical) Sampling speed 2048 times/second Recording period 32 min Power supply Rechargeable lithium battery 3.7V@400mAh Display 128X64 Dot matrix OLED Dimension Diameter 102mm* thickness 7.6mm Weight 136g   read more

Taber 5750 Linear Abrasion Tester Brand: Rankconn Instruments Model: Taber 5750 Machine Introduction: It is suitable for testing the wear resistance of plastics, auto parts, rubber, leather and textile, electroplating, free disassembly, paint, printing and other products. It can be used to evaluate the wear-resisting property of the products, and can be used for the single or multiple scratches and color transference of the affordable products. Dry grinding test and wet grinding test can be carried out. Suitable for testing any size or shape of the product, the abrasion test of the product with contour surface and polishing surface characteristics is ideal.   Function: To evaluate the abrasion resistance, scratch resistance of products (single or multiple scratches) and the transitivity of color (Usually crocking resistance or rubbing fastness) and so on. And can do dry abrasion test, wet abrasion test.   Test Standards: ASTM D3884 , ASTM D1175 , ASTM D1044 , ASTM D4060 , TAPPI T476 , ISO 9352 , ISO 5470-1 , JIS K7204 , JIS A1453, JIS K6902 , JIS L1096 , JIS K6964 , DIN 52347 , DIN 53109 , DIN 53754 , DIN 53799   Features: Parameters such as moving distance, rotating speed, rotation number and load can be set. Various wear media and accessories can be selected. (the optional sample holder and other optional accessories shall be matched with the test of hanging, damage degree, alcohol resistance test, coin scratch resistance test, etc.) Ensure the stability and accuracy of the test: generally, the grinding head is of the same size and shape as the rubber wipe head at the end of the pencil. It is made of high quality abrasion materials. It can ensure the stability of the test.   Specification: Move distances ''0.5'', ''1'', ''2'', ''3'' and ''4''; Special distance can be customized. Adjustable RPM 0-999,999 RPM (Revolutions Per Minute) (Note: rubber grinding head may need to be replaced during this period). Test speed 0-60 times/min, adjustable movement speed. TABER standard speed: 2, 15, 25, 30, 40 and 60 return/min Standard load ranges 350g~2,100g ( 250g , 3pcs, or customized) Power supply 220V 50HZ or customized Machine size 430*280*480 cm read more

TAISITE - Biochemical Incubator / Cooled Incubator Brand: Taisite Model: CBI-80L, CBI-80P, CBI-150L, CBI-150P, CBI-250L, CBI-250P, CBI-400L, CBI-400P read more

Pen Type Leeb Hardness Tester Brand:  SNDWAY Model: SW-6200   Description: SW-6200 is a highly integrated Leeb hardness tester with compact structure and massive scale. It is very suitable for rapid on-site hardness testing in narrow space and concave environment. Features: Test hardness according to Leeb hardness measuring principle Support multiple metal materials Adopt 128x64 black and white screen The instrument has automatic power off and software calibration functions Accurate measurement based on dynamic rebound method is applicable to the on-site detection of metal hardness and the detection indentation is very small. Color: As shown Material: Metal   Package Contents: 1 x SW6200 Integrated Leeb Hardness Tester kit 1 x USB Connection Wire  Technical Specifications: Model SW-6200 Display Screen 1.77'' 128x64 black and white dot matrix LCD Language Chinese/English Impact Device Standard type D Measuring Range 170~960HLD Accuracy ±6HL @760HLD，±10HL @530HLD Standard Hardness Sample Optional Measuring Direction Vertical down, Diagonal down, Horizontal, Diagonal up, or Vertical up Hardness Measuring Material Steel and cast steel, Alloy tool steel, Stainless steel, Grey cast iron, Nodular cast iron, Cast aluminium alloy, Copper-zinc alloy (Brass), Copper-tin alloy (Bronze), Copper, Forged steel, Intensity Measuring Material Low carbon steel, High carbon steel, Chromium steel, Chromium vanadium steel, Chromium nickel steel, Chromium molybdenum steel, Chromium nickel molybdenum steel, Chromium manganese silicon steel, ultra high strength steel, Stainless steel Hardness Parameter HL, HB, HRB, HRC, HRA, HV, HS Battery Working Life 11 hours Battery Type 350 mAh built-in Li-ion battery Power Supply DC 5V/500 mAh Type-C USB port Operation Environment No strong vibration, strong magnetic field, corrosive medium and serious dust in the surrounding environment Operating Temperature & Humidity 0℃～40℃，10%RH~80%RH Storage Temperature & Humidity -10℃～50℃，10%RH~70%RH Product Dimension 165 x 42 x 27 .5mm       read more

Elitech 100,000 Points Digital Temperature Humidity Data Logger Medical Refrigerator Thermometer Vaccine Fridge Temperature Monitor Max Min Average Value Brand: Elitech Model: GSP-8   Description: Elitech GPS-8 data logger is mainly used to record the temperature and humidity of three aspects： FOOD, LIFE SCIENCES and CONSUMER & INDUSTRIAL. It is widely applicable to each link in the storage and logistics of the cold chain, such as refrigerated containers, refrigerator trucks, cooler bags, cooler cabinets, medicine cabinets, cold storage, laboratory, etc. When you first use the data logger, please install our free data-management software. Once you connect it to your Win/Mac system, the log interval, C/F temperature unit (shown both on the report and screen), and alarm limits can be adjusted via the USB cable. In addition, data could be saved, graphed, exported, and in Excel/PDF format.     Specification:   Temperature Range Internal: -20 ~ 60 °C (-4 ~ 140 °F) External: -40 °C ~ 85 °C (-40 at ~ 185°F) Temperature Accuracy ± 0,3 ℃/± 0,6°F  (-20 ~ 40 ℃), ± 0,5 ℃/± 0,9°F Humidity Measurement Range 0~100% RH Humidity Accuracy ± 0,3 ℃/± 0,6 °F (-20 ~ 40 ℃), ± 0,5 ℃/± 0,9 °F Resolution 0.1 °C/names; 0.1% RH Memory Capacity Up to 100,000 points Interval with logging 10 seconds to 24 hours Data Interface Micro-USB Software ElitechLog, for macOS & Windows system Report Format PDF/EXCEL/TXT * via ElitechLog software (TXT for WINDOWS ONLY.) Ability Offer Single-use 3.6V ER 14505H lithium battery; or Powered via USB Battery life Two years at room temperature with 15 minutes record interval and buzzer alarm turned off. Certification EN12830, CE, RoHS Dimensions 94mm*90mm*29mm Logging Mode Stop when full; Circular Logging Alarm Configuration Buzzer; LCD Display     read more

Visual Inspection Digital Microscope (Large Viewing Field) Brand: Rankconn Instruments Model: RC-101D Technical Specification: Model RC-101D Zoom ration 1 to 14 X Working Distance 10cm and above Pixel Resolution 1920 x 1080 Display Resolution HDMI: 1080P @ 60fps LAN port: 1080P @50fps Focus method Auto focus/Manual focus (Both Features) Output HDMI Control Setting Features Monitor on screen display control setting (Wireless Mouse control ) Camera Image Sensor 1/2.8 Color CMOS Whiteness Auto/Manual Power DC 12V                     Zoom vs Viewing Field Area, Ratio at 100mm working distance Reference Table: Zoom Viewing Field (L x W) 1X 171 x 92 mm 2X 89 x 50 mm 3X 71 x 40 mm 4X 60 x 33 mm 5X 52 x 29 mm 14X 24.3 x 13.5 mm (A4 Size)   Real Image Capture: read more

DRUCK - Genii Advanced Modular Calibration System DPI620G Brand : Druck Model : DPI620G Product Descriptions This ultra-compact basic electrical or electrical with frequency and temperature calibrator with full HART communicator and optional Foundation Fieldbus communicator provides simultaneous measurement and source capabilities for the setup, testing and calibration of most types of process instruments including transmitters, transducers, gauges/ indicators, switches, proximity detectors, counters, RTDs, thermocouples and valve positioners. Product Features • Multiple models to satisfy budget & application requirements • High resolution touch display and UI (user interface) supporting gestures and swipes for a flatter menu structure and greater ease of use. • HART and Foundation Fieldbus digital communication with complete device description libraries, internal modems and free of charge upgrades. • ATEX and IECEx approved system for use in zone 1 and 2 classified hazardous areas. • ETL approved for use in class I zone 1 hazardous locations. • UI DASHBOARD to quickly launch applications such as CALIBRATOR, HART and Foundation Fieldbus. • TASK menu allows single touch configuration for common devices such as pressure and temperature transmitters, transducers, switches, and valve positioners. Most used and user configured tasks can be added to FAVOURITES. • Physical or *Bluetooth® wireless connection to a PV624 hybrid pressure controller base station. Technical Specifications read more

90° Peel-off Force Motorized Test Stand Brand: Rankconn Instruments Model: SLS-M Machine Introduction:        SLS-M Peel-off Force Motorized Test Stand is specialized in testing vertical peel-off force. Moreover, it is used for test cling force of copper-foil circuit on PC board and adhesive intensity of silver paper, aluminum foil, rubberized fabric and so on. This test stand adopts trapeziform screw drive and holistic nut design. There is a degree of 45°between aquaplane and level, which makes sure that the tested object moves while it is tested, so that the vertical peel-off testing is achieved. Manual operation, simpleness and stability.                  Technical Specification: Max Capacity : 500N/50Kg;   Test Speed : 10-60mm/min Stroke : 360mm; Applied With : Push Pull Force Gauge, various clamps. Dimension L*W*H(mm) : 660*330*800;    Weight : Approx 40kg; read more