FAITHFUL - Precision Vacuum Drying Oven  Brand: Faithful Model: DZ-1BIV, DZ-2BIV, DZ-3BIV, DZ-4BIV Product Description：   1. 4-sides Heating method, Temperature conduction by shelves, more efficiency. 2.With inflatable port, once-forming thermostability silica gel Sealant strip, with good tightness. 3. Double Observation glass window, inner is explosion - proof glass, outside is resin protection plate, more safety. 4. Fastening handle, convenient for opening and closing. 5. LCD controller,multiple groups of date3 display on one screen, intelligent PID control system, with PT100 sensor. 6. LCD vacuum gauge, accuracy class 0.5, Mpa, Kpa, bar, Psi, KGF/cm2 five pressure units optional switch. Technical Parameters:   Model DZ-1BIV DZ-2BIV DZ-3BIV DZ-4BIV Heating Mode Four walls heat conduction and decompression Function Temp. Range RT+10-250℃ Vacuum Degree Range <133Pa Temp. Resolution Ratio 0.1℃ Temp. Motion ±1℃ Heating-Up Time 80 min 100 min 120 min 120 min Structure Inner Chamber High Quality stainless steel sheet Outer Shell cold rolling steel electrostatic spraying exterior Insulation Layer High quality aluminium silicate cotton(with CE certification) Heater stainless steel electric heating tube Observation Window Bullet proof tempered glass Vacuum Diameter LCD display, accuracy class 0.5 Nozzle Diameter 10mm   Power Rating 0.8 kw 1.4 kw 2.0 kw 3.0 kw Controller Temp. Control Mode Two temperature section PID intelligent Temp. Setting Mode Touch button setting Temp. Display Mode LCD Color screen Liquid crystal displays multiple groups of data on one screen Timer 0-9999 minutes (with timing wait function) Operation Function Fixed temperature operation,timing function, auto stop Additional Function Sensor deviation correction, temperature overshoot self-tuning, internal parameter locking, power off parameter memory Temp. Sensor PT100 Safety Device Over temperature sound-light alarm Specification Inner Chamber(W*D*Hmm) 300*300*270 415*370*340 450*450*450 550*600*650 Exterior Size(W*D*Hmm) 480*480*606 560*540*680 640*590*780 740*740*1000 Packing Size(W*D*Hmm) 580*540*760 704*620*814 730*690*944 839*850*1190 Capacity 24L 52L 91L 214.5L Number of Shelf 4 6 7 8 Load per Rack 15kg Shelf Space 40mm 40mm 50mm 70mm Power Supply(50/60HZ) Current Rating AC220V/3.6A AC220V/6.3A AC220V/9.1A AC220V/13.6A NW/GW(kg) 42/52 67/92 82/105                       170/200 Accessory Shelf 2 Shelf Frame 4 Optional Accessories silicone connecting pipe, vacuum pump filter, vacuum pump read more

RANKCONN - Two Ways Articulating Borescope Brand: Rankconn Instruments Model: RC-T50M-2W Specification:    read more

RANKCONN - Laboratory Test Sieve Shaker Brand: Rankconn Instruments Model: UF300 Product Introduction: Model UF300 (digital frequency modulation) standard inspection and screening machine adopts the principle of fixed motor and high-frequency directional driving to screen and determine materials efficiently. It has the advantages of low noise, light weight, compact structure and standard precision, and is widely used in laboratories, quality inspection rooms and other inspection departments to determine the particle size distribution of particles and powder materials and determine and analyze the impurity content of products. According to different materials, the inspection screening machine can realize different screening frequencies and screening duration through electronic delay (that is, timing function) and directional frequency modulator; At the same time, it can also realize the same working trajectory in the same direction and the same vibration duration, frequency and amplitude for the same kind and different batches of materials, which can greatly reduce the uncertain factors caused by manual screening, thus reducing the inspection error, ensuring the consistency of sample analysis data and making standard judgments on product quality. Technical Parameter: read more

RANKCONN - Industrial Grade Dehumidifier  Brand: Rankconn Instruments Model: FL-S90M Product Introduction: Dehumidifier is an air conditioning device which reduces and maintains the level of humidity in the air. Spacification: read more

CROSS CUTTING RULE Brand: Rankconn Instruments Model: RC-503  Technical Specification:   Model RC-503 Cutting Distance 1mm、1.5mm、2mm、3mm Cutting Length 35mm Cutting Number 11 teeth for each  read more

Industrial Grade - Dehumidifier Brand: Rankconn Instruments Model: FL-S58M Product introduction: Dehumidifier is an air conditioning device which reduces and maintains the level of humidity in the air.   Features: Big Touch Screen Control Panel 8 Litre water tank & soft pipe for directly drain Fault self-check, fault diagnose automatically   Specification: Model FL-S58M Dehumidify Capacity (30°C, RH80% RH) 58L/Day Voltage AC 220-240V/50Hz/1PH; 110V/60HZ/1PH Air Circulation 500m3/h Air Filter Primary/Medium/High Power Input 650W Work Temperature 5~38°C Refrigerant Gas R410A/R22/R407C Dimension (L*W*H) 372 x 394 x 700mm Net Weight 40kg Suitable for Floor Area 40 ~60 m3 read more

JOANLAB - Analytical Balance  Brand: Joanlab Model: FA Series 1. Electromagnetic force compensation technology. 2. Aluminum alloy die cast base and stainless steel pan. 3. Super bright LED display with backlight. 4. RS232 Interface. 5. Clear glass windshield supplied as standard. 6. Overload protection,bubble level adjustment, under hook. 7. Full capacity substraction. 8. Multi weighing units conversation: g/mg/ct/oz. 9.Internal calibration for choice. 10. Weighing, piece counting, percentage weighing. 11. Universal power adapter supplied as standard. 12. Certificated calibration weight supplied as standard. Product Specification: Analytical Balance Technical Data Model FA1004 FA1004N FA1204 FA1204N FA2004 FA2004N FA2204 FA2204N Picture Max Capacity 100g 120g 200g 220g Accuracy class Min readout 0.01g Accuracy 0.1mg Repeatability ±0.0002g Linearity error ±0.0003g Stability time   ≤3S Working temp. 15℃ ~ 35℃ Pan size     standard model φ80mm / optional model φ90mm Dimensions 300*200*295 mm Power supply    power adapter Calibration mode  external calibration/internal calibration G.W. 6.0kg N.W. 5.0kg Packing size 425*320*415 mm Communication interface   RS232(USB interface optional) read more

HANDPI - LX-F Shore Durometer Sponge Foam Hardness Tester Brand: HANDPI Model: LX-F Introduction: LX-F type sponge durometer is suitable for the determination of soft foam, polyurethane foam rubber products hardness. it will be different with the other hardness tester In the aspects of using. When using, the presser foot directly contact to the sample, and see its own weight as force measurement load.   Specification: Model LX-F Scope of pressure needle route 0 ~ 2.5millimeters The scale value 0-100 degrees The force of pressure needle end 550mN~4300mN(56~438.5g)   The Method of Use: 1. Handheld the middle of the instrument, located the hardness tester gently on the plane specimens which is bigger than presser foot (or specimen). 2. Reading out the value in 1 seconds when durometers’ presser foot contact with the sample smoothly. 3. The tick of pointers is the hardness value of sample (specimen). 4. In order to improving the accuracy of measurement, you should put the sample on a flat plate glass or plate. 5. Each measuring point should be measured only one time, the measuring point at a distance of more than 25mm of different parts from the same sample. should be more than 5 points. 6. To take the average of measurement results, namely it’s the hardness value of the materials. read more

Foam Density Meter/ Foam Density Balance Brand: Rankconn Instruments Model: ALD-320S Product Introduction: High-precision touch screen solid density meter is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, HG4-1468, JIS K6268, ISO 2781, ISO 1183, GB/T208, GB/T5163 , GB/T 1933, GB/T4196, GB/T4123, GB/T5586, JB/T7780 adopt the principle of Archimedes' water displacement method. Widely used to test any irregular density greater than 1 or less than 1 or less rubber, plastics, wires and cables, food, composite materials, cosmetics, shoe materials, glass, precious metal hardware, plastics, wires and cables, auto parts, magnetic iron cores, powders Metallurgy, micro fans, tires, etc.; can directly read the average weight in air, average weight in water, and density, volume, and percentage of samples of solids, particles, films, and floating bodies. Features 1.  Built-in temperature sensor can automatically realize temperature compensation function 2.  Using sensors imported from Germany HBM, the weighing is stable and the density value is accurate. 3.  5-inch touch screen operation, easy to operate, built-in guided test step prompts, simplifying and speeding up the operation process 4.  Solution compensation setting, using water as medium, other liquid media can also be used 5.  Automatically store 100 sets of test values, and automatically calculate the average, maximum and minimum values 6.  The upper and lower limits of the density of the test product can be set to judge whether the material is qualified or not. It has a buzzer function. 7.  Standard RS232 printer interface (USB interface can be customized), which can be connected to thermal printers, label printers and computers, and can customize printed content such as tester name, sample name, company name, etc. 8.  Multi-function host, optional liquid accessories can be used to test the density of liquids, optional powder devices can be used to test the true density of powders, and a density meter can be used to test solids, liquids and powders. 9. The stability time, zero point and response speed of the density meter can be adjusted by yourself according to the laboratory test environment Specification Model ALD-320S Weighing range 0.001g-320g Density readability 0.0001g/cm3 Density test platform Precision aluminum alloy one-piece molding Density test range Density＞1,＜1 can be tested Measurement types Any irregular solids, particles, and floating bodies can be measured The results show Density, volume, volume percentage, density average, density minimum, density maximum Measurement principle Archimedes principle buoyancy method Measurement time About 5 seconds Display 4.3”   industrial touch screen Sink PC material one-piece injection-molded transparent sink (size: length 15.3 × width 10.7 × height 8.0cm) Parameter settings Water temperature setting, measurement solution density compensation setting, standard material density setting, standard volume setting Data statistics Automatically save 100 groups of density values Correction method Single point automatic correction, multi-point automatic correction Data interface Standard RS-232 interface, customizable USB interface Power supply voltage AC100V~240V 50HZ/60HZ Package Size Length 42.5 × Width 17.5 × Height 32.5cm read more

Elitech LD-100+ Heated Diode Refrigerant Leak Detector HVAC AC Sniffer Automotive Brand: Elitech Model: LD-100+   Product Introduction: Elitech LD-100+ is a portable refrigerant leak detector using the heated diode gas sensor and precise control circuits, which enable the device to detect all halogen refrigerants. High sensitivity, fast response, stable performance and multiple functions make your job easier and more convenient. This is achieved automatic and manual mode suitable for locating leaks in various complex environments. In addition to the supreme performance and functional advantages, it offers a new suction structure design that increases the sensitivity while having the anti-water absorption function at the same time.   Feature: 【Detect Multiple Refrigerants】Triggers on R290/R11/R22/R404a/R410a/R600a/R1234yf and all halogenated refrigerants including CFCs, HFCs, HCFCs, HCs, HFOs, and blends. 【2 Detection Mode】Automatic and manual mode suitable for locating leaks in various complex environments. 【Fast Response】 Warms up in the 30s and responds in 3s; 3 adjustable sensitivity with maximum sensitivity 0.11oz/yr. 【Anti-water Absorption Design】The new pump-suction structure increases the sensitivity while having the anti-water absorption function at the same time 【Safe and Reliable】Meets CE and EN14624 industrial standards.   Specification: Model LD-100+   Sensor type Heated diode gas sensor   Minimum detectable leakage ≤3 g/year   Reaction time ≤3 seconds   Warm-up time  30 seconds   Reset time ≤10 seconds   Operating temperature range 0-50℃   Operating humidity range  : <80%RH (non-condensing)   Applicable refrigerant CFCs, HCFCs, HFCs, HCs and HFOs Sensor lifetime  ≥1 year Reset Automatic/manual Probe length 420mm(16.5in) Battery life 7 hours           Package includes: 1 X LD-100+ leak detector ( excluding sensor) 1 X Heated diode gas sensor 3 X AA alkaline battery 1 X Packing box 1 X Performance report   read more