Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
9 hours ago —
TESTO - Sound Level Meter 815

TESTO - Sound Level Meter 815

TESTO - Sound Level Meter 815 Brand : Testo Model : Testo 815 Product Features Easy to adjust (adjustment screwdriver included) Frequency weighting to Characteristic A and C Maximum and minimum value memory Built-in tripod knuckle screw (1/4 inch) Technical Specification Storage temperature +14 to +140 F Operating temperature +32 to +104 F Battery type 9 volt battery Battery life 70 hr Dimensions 10 x 2.1 x 1.7 in Sound Measuring range +32 to +130 dB Accuracy 1.0 dB Resolution 0.1 dB read more
Carlssoon Technologies (Malaysia) Sdn Bhd added 3 new photos
14 hours ago —
MITUTOYO - Digital 3-Point Internal Micrometer IP65 468-177
FUJIFILM C ND-LCD SCREEN INSPECTION
MITUTOYO - Digimatic Outside Micrometer 293-241-30
BOSCH - Impact Drill GSB 120 LI

BOSCH - Impact Drill GSB 120 LI

BOSCH - Impact Drill GSB 120 LI Brand: Bosch Model: GSB 120 LI Product Description:  • Use your drill driver more flexibly – drive screws and drill in wood, steel and masonry! • Flexibility in applications due to impact mechanism with single-sleeve keyless chuck for easy accessory changes and long runtime per battery charge for continuous operation • Bosch Electronic Cell Protection (ECP) protects the battery against overload, overheating and deep discharge • Most powerful cordless impact drill in its class • LED light for better working vision Technical Specification:  Battery voltage 12 V Battery type Lithium-ion Torque, max. (hard) 28 Nm Torque, max. (soft) 11 Nm Torque, max. (hard/soft) 28 / 11 Nm No-load speed (1st gear/2nd gear) 0 – 400 / 0 – 1300 rpm Max. impact rate 18,750 bpm Chuck clamping range 0.3 – 10 mm Charging time, approx. 94 mins Torque settings 20 Length 188 mm Width 46 mm Height 195 mm Toolholder three-jaw chuck Max. drilling diameter in wood 19 mm Max. drilling diameter in steel 6 mm Max. drilling diameter in masonry 8 mm Max. screw diameter 7 mm Weight incl. battery 1.0 kg read more
Carlssoon Technologies (Malaysia) Sdn Bhd added 2 new photos
16 hours ago —
DINO-LITE - Digital Microscope AM3113T
MITUTOYO - Digimatic Micrometer 293-180-30
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Jun 24, 2022 at 11:39 am —
RIKENSEIKO - Biritron Static Removal Pole

RIKENSEIKO - Biritron Static Removal Pole

RIKENSEIKO - Biritron Static Removal Pole  Brand: Biritron Product Description: By touching the electrostatic removal sheet on the panel to reduce or remove static electricity from the human body. Equipped with a static check function that allows you to check the power removal effect with 5 LEDs. Battery-operated no wiring required, Requires 2 AA batteries and no power wiring required (test batteries included). The largest size of our product electrostatic removal sheet makes it easy to use. Pole-type for easy installation Technical Specification: Brand ‎RIKENSEIKO Color ‎Bule Material Type ‎Steel, reinforced plastic Product Dimensions ‎36 x 36 x 96.5 cm; 6 Kg   read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Jun 23, 2022 at 05:57 pm —
IKA - C-MAG HS4

IKA - C-MAG HS4

IKA - C-MAG HS4 Brand : Ika - Germany Model : HS4 Product Description Magnetic stirrer with heating and ceramic heating plate which offers excellent chemical resistance. *Powerful motor for stirring quantities of up to 5 l (H2O) *Fixed safety circuit of 550 C *Hot Top indicator >> hot surface warning to prevent burns! *Exact temperature setting via digital display (LED) *Digital error code display *Elevated control panel for protection against leaking liquids Technical Specification Number of stirring positions 1 Stirring quantity max. per stirring position (H2O) 5 l Motor rating output 1.5 W Direction of rotation left Speed adjustment scale 0 - 6 Speed range 100 - 1500 rpm Self-heating of the set-up plate by max. stirring (RT:22C/duration:1h) +1 K Heat output 250 W Temperature display set-value LED Heating temperature range 50 - 500 C Heat control Turning knob Heating rate heating plate 2.5 K/min Temperature setting resolution of heating plate 5 K Fixed safety circuit 550 C Set-up plate material ceramic Set-up plate dimensions 100 x 100 mm Dimensions (W x H x D) 150 x 105 x 260 mm Weight 3 kg Permissible ambient temperature 5 - 40 C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 21 Voltage 230 V Frequency 50/60 Hz Power input 270 W read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Jun 23, 2022 at 12:00 pm —
MITUTOYO - Linear Scale Counter KA-212

MITUTOYO - Linear Scale Counter KA-212

MITUTOYO - Linear Scale Counter KA-212 Brand : Mitutoyo Model : KA-212 Product Features This counter displays length indication transmitted from a linear scale. The KA-Counter offers you the following benefits: Can be used as a standard counter or a lathe counter by modifying parameters. Downsizing, weight saving and multiple function have been realized. Sub display for easy operation. Text data can be output using the optional USB interface. The optional external interface RS-232C enables connection to a PC and a printer. Technical Specification Axes: 2 Mass: 1.25 kg Display: 7-segment, 8-digit + sign + 8-character alphabet LED display Resolution: With AT100 Series: 0.05 - 0.0001 mm With AT715: 0.01 - 0.001 mm Dimensions (WxDxH): 260 x 167 x 80 mm Operation temperature: 0C to 45C Macro functions: Rectangular drilling and round milling newly added Main features: Feed speed display; taper machining function; tool data; multipoint compensation; scale check function; calculation function Output (optional): RS-232C / USB ZERO SET: Yes PRESET: Yes Diameter display: Yes 1/2 calculation: Yes mm/inch conversion: Yes Bolt-hole circle machining: Yes Scale reference points: Yes Linearity error compensation: Yes Zero approach function (Incremental mode): Yes Addition of 2-scale data: Yes Coordinate system switching: Yes Error message: Yes Lower digit blanking out: Yes Measurement direction setting: Yes Memory backup: Yes Pitch machinig: Yes Resolution setting: Yes Smoothing: Yes Power supply: 100-240V-AC 50/60 Hz read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo in Water Analysis Meter
Jun 22, 2022 at 02:25 pm —
AZ INSTRUMENT - pH Meter Pen Type 8685A

AZ INSTRUMENT - pH Meter Pen Type 8685A

AZ INSTRUMENT - pH Meter Pen Type 8685A Brand: AZ Instrument Model: 8685A Product Description: All push button operation, one touch only for antomic calibration, depress another to increase or decrease the calibration values. Dual LCD display for pH/C & F Automatic Temperature Compensation assures that readings are corrected for temperature offsets. Low battery indicator and Sleop mode disablement. No tools or trimmers needed for calibration. Supplied with battery, manual, gift box Product Features: * Big LCD dual display Temperature & pH value with ATC * pH range: 0.0~14.0 * pH value resolution up to 0.1 * Measuring stability indicator * One touch auto-calibration up to 3 points * Calibration values are adjustable * Cap to keep sensor wet & last life time * Power by 4pcs LR44 batteries * Waterproof housing meets IP65 rating * Data hold to freeze readings * Pen size, easy to fit in pocket * Low battery indicator * Auto power off * Temperature /F unit switchable Technical Specification: Model 8685A pH Measuring Range 0.0~14.0 pH Accuracy 0.2 pH Resolution 0.1 Temperature Measuring Range 0~60.0 Temperature Accuracy 1 Temperature Resolution 0.5 ATC ATC pH Calibration Up to 3 points LCD Size 30(L) * 18(W) mm Operating Temperature 0~50 Operating RH% Humidity 80% Storage Temperature -10~50 Storage RH% Humidity 90% Sensor Life Time >6 months (with good maintenance) Meter Size 165(L) * 35(W) * 32(H) mm Weight ~115g Battery LR44 *4 PCS Standard Package Meter, Batteries, Manual, Paper Box read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Jun 21, 2022 at 11:37 am —
SUNDOO - SH Digital Push Pull Force Gauge

SUNDOO - SH Digital Push Pull Force Gauge

SUNDOO - SH Digital Push Pull Force Gauge Brand: Sundoo Model: SH Series Product Description: SH Series Digital Push Pull Force Gauge is multifunctional push pull testing instrument with high resolution. It is applied in push/pull test, insertion/withdraw test, and fracture test. Moreover, the product, connecting to computer to display the test force curve and test process, is efficient push pull testing equipment in a new generation. Product Features: ·        Peak hold time (1-10 seconds) setting. ·        Upper and lower limit setting, red/green indicator lights and buzzer alarm. ·        10 test value storage, average calculation function. ·        Select units: N/kgf/lbf. ·        Auto-off time setting ( 1-60 minutes) without operation. ·        RS232 output,connection to software, force curve view, data saving for analysis and printing. Technical Specification: Product Drawing:                 read more
Carlssoon Technologies (Malaysia) Sdn Bhd added new photo
Jun 20, 2022 at 05:30 pm —
IKA - Eurostar 20 Digital Overhead Stirrer

IKA - Eurostar 20 Digital Overhead Stirrer

IKA -  Digital Overhead Stirrer Eurostar 20 Brand : IKA - Germany Model : Eurostar 20 Product Description Laboratory stirrer designed for simple stirring tasks for quantities up to 15 l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample. Product Features -Digital speed display -Infinitely adjustable speed -Push-through agitator shafts -Overload protection -Short-term overload operation -Slim casing -Quiet operation -Error code display   Technical Data   Stirring quantity max. per stirring position (H2O) 15 l Motor rating input 70 W Motor rating output 42 W Motor principle Brushless DC Speed display LED Speed range 0/30 - 2000 rpm Viscosity max. 10000 mPas Output max. at stirring shaft 42 W Permissible ON time 100 % Torque max. at stirring shaft 20 Ncm Speed adjustment stepless Setting accuracy speed 1 rpm Deviation of speed measurement n > 300rpm 1 % Deviation of speed measurement n < 300rpm 3 rpm Stirring element fastening chuck Chuck range diameter 0.5 - 10 mm Hollow shaft, inner diameter 11 mm Hollow shaft (push-through - when stopped) yes Fastening on stand extension arm Extension arm diameter 16 mm Extension arm length 220 mm Speed control electronic Nominal torque 0.2 Nm Housing material alu-cast coating / thermoplastic polymer Dimensions (W x H x D) 86 x 248 x 208 mm Weight 3.9 kg Permissible ambient temperature 5 - 40 C Permissible relative humidity 80 % Protection class according to DIN EN 60529 IP 42 Voltage 230 V Frequency 50/60 Hz Power input 70 W read more
next page