- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
ELCOMETER - Testex® Replica Tape (122)
| Previous | 60 / 67 | Next |
ELCOMETER - Testex® Replica Tape (122)
Brand: Elcometer
Model: 122
Description:
Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, which can then be measured using the Elcometer 124 Thickness Gauge. Elcometer 122 Testex® Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.
• For profiles between 12 & 25μm (0.5 & 1.0mils): Coarse Minus Tape
• For profiles between 20 & 38μm (0.8 & 1.5mils): Coarse Tape
• For profiles between 38 & 64μm (1.5 & 2.5mils): Average of Coarse and X-Coarse Tape
• For profiles between 64 & 115μm (2.5 & 4.5mils): X-Coarse Tape
• For profiles greater than 115μm (4.5mils): X-Coarse Plus Tape
There are 50 tests in each roll.
Standards:
ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000
Technical Specification:
Brand: Elcometer
Model: 122
Description:
Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile, which can then be measured using the Elcometer 124 Thickness Gauge. Elcometer 122 Testex® Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.
• For profiles between 12 & 25μm (0.5 & 1.0mils): Coarse Minus Tape
• For profiles between 20 & 38μm (0.8 & 1.5mils): Coarse Tape
• For profiles between 38 & 64μm (1.5 & 2.5mils): Average of Coarse and X-Coarse Tape
• For profiles between 64 & 115μm (2.5 & 4.5mils): X-Coarse Tape
• For profiles greater than 115μm (4.5mils): X-Coarse Plus Tape
There are 50 tests in each roll.
Standards:
ASTM D 4417-C, BS 7079-C5, ISO 8503-5, NACE RP0287, SSPC PA 17, US Navy NSI 009-32, US Navy PPI 63101-000
Technical Specification:
| Description | Profile Range | Part Number | ||||
| Metric | Imperial | 1 Roll | Pack of 10 | Pack of 50 | Pack of 100 | |
| Elcometer 122 Coarse Minus | 12 – 25 μm | 0.5 - 1.0 mils | E122----A1 | E122----A10 | E122----A50 | E122----A100 |
| Elcometer 122 Coarse | 20 – 64 μm | 0.8 - 2.5 mils | E122----B1 | E122----B10 | E122----B50 | E122----B100 |
| Elcometer 122 X-Coarse | 38 – 115 μm | 1.5 - 4.5 mils | E122----C1 | E122----C10 | E122----C50 | E122----C100 |
| Elcometer 122 X-Coarse Plus | 116 – 127 μm | 4.6 - 5.0 mils | E122----F1 | E122----F10 | E122----F50 | E122----F100 |