- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
NIHON DOKI - Diameter Tape
| Previous | 209 / 270 | Next |
NIHON DOKI- Diameter Tape
Brand Nihon Doki – Japan
Product Introduction:
A sculpture scale that allows you to easily know the diameter of a workpiece by simply winding it around the circumference of the object and reading the scale. Measurements can be made in 0.1mm increments with a main scale of 1mm and a sub-scale of 1/10.
Tape thickness corrected. With in-house inspection report. Aluminum special case included.
* Before measurement, make sure that the tape is not bent or that there is no foreign matter attached. In the same way, check the surface of the object to be measured for foreign matter. When measuring, keep the tape straight and make sure that the measured object is not obliquely measured. In order to ensure correct measurements at any time, remove dirt and store it carefully after use.
Standard Specification:
Tape Width: *6.5mm (Reading Part is 13mm)
Tape Thickness: *0.2mm ± 0.01mm
Accuracy assured: *±0.1mm to Measurement of Diameter
Tape Material: *Stainless Steel Tape, SUS301 steel
Brand Nihon Doki – Japan
Product Introduction:
A sculpture scale that allows you to easily know the diameter of a workpiece by simply winding it around the circumference of the object and reading the scale. Measurements can be made in 0.1mm increments with a main scale of 1mm and a sub-scale of 1/10.
Tape thickness corrected. With in-house inspection report. Aluminum special case included.
* Before measurement, make sure that the tape is not bent or that there is no foreign matter attached. In the same way, check the surface of the object to be measured for foreign matter. When measuring, keep the tape straight and make sure that the measured object is not obliquely measured. In order to ensure correct measurements at any time, remove dirt and store it carefully after use.
Standard Specification:
- Housing: *Special Aluminium Case (with display carton)
- Tension: *Standard tension: 20N at 20¡æ
- Graduation: *Calibration engraved, thickness correction made at 0-point
Tape Width: *6.5mm (Reading Part is 13mm)
Tape Thickness: *0.2mm ± 0.01mm
Accuracy assured: *±0.1mm to Measurement of Diameter
Tape Material: *Stainless Steel Tape, SUS301 steel
| Model No | Measuring Range(Diameter) |
| D- 3V | 50mm¡« 300mm |
| D- 6V | 250mm¡« 600mm |
| D- 9V | 550mm¡« 900mm |
| D-12 V | 850mm¡«1200mm |
| D- 15V | 1150mm¡«1500mm |
| D- 18V | 1450mm¡«1800mm |
| D-21 V | 1750mm¡«2100mm |
| D- 24V | 2050mm¡«2400mm |
| D- 27V | 2350mm¡«2700mm |
| D- 30V | 2650mm¡«3000mm |