- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
RENISHAW 每 TP200/TP200B Modular Probes
| Previous | 193 / 270 | Next |
RENISHAW – TP200/TP200B Modular Probes
Brand: Renishaw
TP 200 probe body
The TP200 probe incorporates micro strain gauge transducers delivering excellent repeatability and accurate 3D form measurement even with long styli. The sensor technology gives sub-micron triggering performance and eliminates the lobing characteristics encountered with standard probes. The solid-state ASIC electronics within the probe ensure reliable operation over millions of trigger points.
TP200B probe body
The TP200B probe uses the same technology as TP200 but has been designed to have a higher tolerance to vibration. This helps to overcome the problem of 'air' trigger generation which can arise from vibrations transmitted through the CMM or when using longer styli with faster positioning speeds. Please note that we do not recommend the use of TP200B with the LF module or cranked star styli.
Brand: Renishaw
TP 200 probe body
The TP200 probe incorporates micro strain gauge transducers delivering excellent repeatability and accurate 3D form measurement even with long styli. The sensor technology gives sub-micron triggering performance and eliminates the lobing characteristics encountered with standard probes. The solid-state ASIC electronics within the probe ensure reliable operation over millions of trigger points.
TP200B probe body
The TP200B probe uses the same technology as TP200 but has been designed to have a higher tolerance to vibration. This helps to overcome the problem of 'air' trigger generation which can arise from vibrations transmitted through the CMM or when using longer styli with faster positioning speeds. Please note that we do not recommend the use of TP200B with the LF module or cranked star styli.
| Measuring Performance | TP 200 | TP200B | ||||
| Principal application | DCC CMM where high accuracy measurement is required | As TP200 but where ‘air’ *trigger events occur | ||||
| Sense directions | 6-way: |
±X, ±Y, ± Z |
6-way: |
±X, ±Y, ± Z |
||
| Unidirectional repeatability (2σ μm) |
Trigger level 1 Trigger level 2 |
0.4 μm 0.5 μm |
(0.000016 in) (0.000020 in) |
0.4 μm 0.5 μm |
(0.000016 in) (0.000020 in) |
|
| XY (2D) form measurement deviation |
Trigger level 1 Trigger level 2 |
±0.8 μm ±0.9 μm |
(0.000032 in) (0.000036 in) |
±1.0 μm ±1.2 μm |
(0.000040 in) (0.000047 in) |
|
| XYZ (3D) form measurement deviation |
Trigger level 1 Trigger level 2 |
±1.0 μm ±1.4 μm |
(0.000040 in) (0.000056 in) |
±2.5 μm ±4.0 μm |
(0.000100 in) (0.000160 in) |
|
| Repeatability of stylus change |
With SCR 200 Manual |
±0.5 μm ±1.0 μm |
(0.000020 in) max (0.000040 in) max |
±0.5 μm ±1.0 μm |
(0.000020 in) max (0.000040 in) max |
|
| Trigger force |
XY plane Z axis |
All modules All modules |
0.02 N 0.07 N |
0.02 N 0.07 N |
||
| Overtravel force (@ 0.5 mm displacement |
XY plane Z axis |
SF/EO module LF module SF/EO module LF module |
0.2 N – 0.4 N 0.1 N – 0.15 N 4.9 N 1.6 N |
0.2 N – 0.4 N 0.1 N – 0.15 N 4.9 N 1.6 N |
||
| Weight (probe sensor + module) | 22g (0.8oz) | 22g (0.8oz) | ||||
| Max. extension (if on PH1O series head) | 300g (11.8oz) | 300g (11.8oz) | ||||
| Max. recommended stylus length (M2 stylus range) |
SF/EO module LF module |
50 mm (1.97 in) steel – 100mm (3.94 in GF) 20 mm (0.79 in) steel – 50mm (1.97 in GF) |
50 mm (1.97 in) steel – 100mm (3.94 in GF) 20 mm (0.79 in) steel – 50mm (1.97 in GF) |
|||
| Probe mounting method | MB thread | MB thread | ||||
| Suitable interface | PI 200 | PI 200 | ||||
| Stylus module changing rack (automatic) | SCR 200 | SCR 200 | ||||
| Stylus module storage rack (manual) | MSR1 | MSR1 | ||||