- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
FLUKE - Digital Multimeter 27 II & 28 II
| Previous | 67 / 85 | Next |
FLUKE - Digital Multimeter
Brand: Fluke
Model: 27 II, 28 II
Description:
The NEW Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), the extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
Features:
Brand: Fluke
Model: 27 II, 28 II
Description:
The NEW Fluke 27 II and 28 II digital multimeters define a new standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. Both meters have IP 67 (waterproof and dustproof) rating, MSHA approvals (pending), the extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95 % humidity, and have been designed and tested to withstand a 3 m (10 ft) drop. The new Fluke 20 Series Multimeters are built to work in the toughest environments.
Features:
- New – IP 67 waterproof & dustproof protection, completely
- sealed for use in harsh environments
- Designed to withstand 3-meter drop (with holster)
- Hi-resolution 20,000 count display mode (28 II)
- True-rms ac voltage and current for accurate measurements on non-linear signals (28 II)
- Average responding voltage and current for measurements (27 II)
- New – Backlit keypad buttons allow for easy visibility in low-lit areas
- Large display digits and 2 levels bright white backlight for increased visibility
- Reversible holster for added protection when not in use
- Withstands hazardous 8,000-volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Long battery life (800 hours)
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- MSHA approval (pending)
| Display | |
| Bar graph/backlight | Yes/Yes |
| Data storage | |
| Peak transient capture | 250 μS (28 II) |
| Min/Max/Avg | Yes |
| Reading hold Yes | Yes |
| Other features | |
| Relative readings (zero) | Yes |
| Battery type | Three AA batteries |
| Warranty and protection | |
| Safety rating | CAT IV 600 V/CAT III 1000 V |
| External protection | Rubber holster |
| Drop test | 10 feet drop test |
| Dustproof/waterproof | Yes, IP 67 rated |
| Warranty | Limited lifetime |
| Size (HxWxL) with holster | 6.35 cm x 10.0 cm x 19.81 cm (2.5 in x 3.93 in x 7.8 in) |
| Weight with holster | 698.5 g (1.54 lb) |