- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
JFE 每 Sonohard Series - Handy Hardness Tester / Ultrasonic Hardness Tester
| Previous | 56 / 60 | Next |
JFE – Sonohard Series - Handy Hardness Tester / Ultrasonic Hardness Tester
Brand: JFE
Model: SH-210A
Brand: JFE
Model: SH-210A
| Model Name | Handy Hardness Tester SONOHARD SH - 21A - E Motorized / manual switchover type probe ) | |
| Measuring Indenter | Diamond indenter for Micro - Vickers (facing - to - the surface angle of 136 '') | |
| Test load and control no. CE making complied models are required to add (CE) with control no |
|
SH - 21 A - E2 |
|
SH - 21A - E1 | |
| Measuring range |
|
|
| Reproducibility |
HRC: ±1.0 HRC, HV: ± (3 % rdg) HV. HS: ±1.0 HS, HBW : ± ( 3 % rdg )HBW |
|
| Applicable test materials | With steel as the principal material, other metallic materials may also be measured by calibrating against standard hardness test block. | |
| Display of measured values | Digital display ( LCD , 4 digits ) with EL backligt | |
| Data memory | 2000 pieces | |
| Digital display units | 1HV, 0.1 HRC, 0.1HS , 1 HBW, 1N / mm2 (tensile strength) | |
| Allowable operating temperature | 0-50°C | |
| Power source | AC adapter (100 - 240V) or lithium ion rechargeable battery operatable for continuous 8 hours (with new battery) | |
| Continious operating hours | 5 hours when featuring a rechargeable BL; 8 hours without BL* BL= backlight | |
| Dimensions |
Display unit: 97mm (W) x 172mm (H) x 50mm (D). Probe diameter: 50mm, length: 170.5mm |
|
| Weight | Display unit: approx. 400g (including battery), Probe and cable : approx. 430g | |
| Carrying case dimensions | 389mm (W) x 132mm (H) x 200mm (D) | |
| Standard components |
1 display unit, 1 probe (including standard attachment / UA5410) . 1 hardness standard test block (around 55HRC), 1 probe cable 1.5m, 1 AC adapter 100 - 240V (A1OWN - 090101) . 1 recharger (MK 8220). 1 lithium-ion battery (MK - 8401), 1 carrying case (MK - 9701). 1 Instruction manual, 1 inspection sheet. |
|
| Option |
Standard hardness test blocks around 600HV, 50HS, 300HB Measuring stands for small objects (SH - P07), Probe attachment for pipes materials (SH-P06) Probe attachment for inner races ( SH-P05 ). Printer model DPUH245AS with cable. Printer paper (TP - H241L). Stand for the main unit (SH-P03) |
|
| Display make-up |
|
|
| Set-up |
|
|
| Alarm | Alarm (buzzer sound) | |
| Output | RS-232C output used for data transmission or printing | |
| Frequency | Motorized / manual switchover type approx. 69 ~ 71kHz | |
| Conversion | Compliant with SAE J417, JIS B 7731 | |
- When using the tester installed in automated machinery, please contact our hardness tester sales department for specifications the testers used for automatic machines.
- The SONOHARD SH - 21A - E is calibrated using the standard hardness test block produced in compliance with JIS B7730 / ISO 6508 - 3 and JIS B7735 / ISO 6507 - 3 by Yamamoto Scientific Tool Laboratory Co., Ltd., Japan who has the quality management system approved under ISO 9001. The values measured by SH - 21A - E is therefore guaranteed by us (Accuracy of measurement under calibration with other makers ' test blocks is out of our guarantee).
- The model name on the catalogue is SH - 21A - E, while it is referred to as SH - 21A - E only in their event operation manual test certificates and IS0 certificates, etc
- A standard export model of SH - 21AE not CE Marking complied, but a CE Marking complied model is also available by factory modification on request and order beforehand.