- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
MAHR 每 Inductive Probe Milimar P1300 M
| Previous | 99 / 270 | Next |
Download Files
Mahr_Inductive_Probe_MiliMar_1.pdf (668.22 KB)MAHR_每_Inductive_Probe_Milimar_P1300_M.pdf (401.57 KB)
MAHR – Inductive Probe Milimar P1300 M
Brand: Mahr
Model: P1300M
Technical Data:
1) Relative to the electrical zero point. Adjustable; lower and upper stops are simultaneously adjusted
2) Measuring force springs are interchangeable, following measuring force springs are available (0.25; 0.5; 1; 1.25; 1.5 N)
Brand: Mahr
Model: P1300M
- Connection jack for an evaluation instrument
- Connecting plug for the probe
- Socket
- Screw sealing plug SW 4.6
- Hose connector for compressed air (external diameter 3 mm)
- Mounting shank
- Locking nut
- Sealing bellows
- Contact point 901 H
- Preferred clamping area
Technical Data:
| Order no. | 4400180 | 4400190 | 4400181 | 4400191 |
| Product type | P1300 MA | P1300 TA | P1300 MB | P1300 TB |
| Measuring range | ± 2.0 mm / ± 0.079“ | |||
| Distance of lower stop 1) | - 2.2 . . . 0 mm / - 0.09 . . . 0“ | |||
| Distance of lower stop 1) | + 2.2 . . . 4.4 mm / + 0.09 . . . 0.173“ | |||
| Lifter/Retraction | Vacuum Lifter (Standard option) | Compressed Air Retraction (max. 1 bar) | ||
| Measuring force at electrical zero point | 0.75 N / ± 0.15 N2) | depending upon air pressure | ||
| Increase in measuring force | 0.3 N / mm | - | ||
| Sensitivity deviation | 0.3 % | |||
| Repeatability fw | 0.1 μm / 4 μin | |||
| Hysteresis fu | 0.5 μm / 20 μin | |||
| Linearity deviation with revised sensitivity | ||||
| within range ± 0.5 mm | 0.4 μm / 16 μin | 1.0 μm / 40 μin | 0.4 μm / 16 μin | 1.0 μm / 40 μin |
| within range ± 1.0 mm | 1.5 μm / 60 μin | 3.0 μm / 120 μin | 1.5 μm / 60 μin | 3.0 μm / 120 μin |
| within range ± 2.0 mm | 3.0 μm / 120 μin | not specified | 3.0 μm / 120 μin | not specified |
| Protection class according to IEC 60529 | IP64 | |||
| Length of cable | 2.5 m / 8 ft (detachable) | |||
| Compatibility - Half Bridge | Mahr | Tesa | Mahr | Tesa |
2) Measuring force springs are interchangeable, following measuring force springs are available (0.25; 0.5; 1; 1.25; 1.5 N)