- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
MAHR 每 Dimensionair ® Air Gages (Single Master System)
| Previous | 93 / 270 | Next |
MAHR – Dimensionair ® Air Gages (Single Master System)
Brand: Mahr
Features:
Technical Data:
Brand: Mahr
Features:
- Uses regular shop air (40 - 1s0 psig).
- lnternal pressure regulator keeps measuring pressures within calibrated range.
- Adjust meter to zero using a single setting master and the zero setting screw.
- High visioility meter has fine line graduations and a needle-thin hand for clear, precise readings. An air filter is included to remove dust and dirt contaminants from airline.
- Tooling mounts to the front of the unit. Connections are tight with finger pressure.
- No recalibration necessary when changing tooling. Just set zero and measure!
- Models available in 5 magnifications, 2 dial styles, and either Metric or lnch.
Technical Data:
| Magnification |
Tooling ID no. |
Range |
Minimum Graduation |
Dial Style |
Surface Finish (recommended) |
Maximum Part Tolerance (recommended) |
Order no. | ||
| µin Ra | / | µm Ra | |||||||
| 1250: 1 | 100 | .006” | .0001” | Regular 82.6 mm/ 3.25” diameter | 100 | / | 2.54 | ±.002” | 2095183 |
| 2500: 1 | 50 | .003” | .00005” | 50 | / | 1.27 | ±.001” | 2095184* | |
| 5000: 1 | 20 | .0015” | .00002” | 20 | / | 0.50 | ±.0005” | 2095185* | |
| 10000: 1 | 10 | .0006” | .00001” | 10 | / | 0.25 | ±.0002” | 2095186 | |
| 20000: 1 | 5 | .0003” | .000005” | 5 | / | 0.12 | ±.0001” | 2095189 | |
| 1250: 1M | 100 | 152 µm | 2 µm | 100 | / | 2.54 | ±50 µm | 2095190 | |
| 2500: 1M | 50 | 76 µm | 1 µm | 50 | / | 1.27 | ±25 µm | 2095191* | |
| 5000: 1M | 20 | 38 µm | 0.5 µm | 20 | / | 0.50 | ±13.5 µm | 2095192* | |
| 10000: 1M | 10 | 15.2 µm | 0.2 µm | 10 | / | 0.25 | ±5 µm | 2095193 | |
| 20000: 1M | 5 | 7.6 µm | 0.1 µm | 5 | / | 0.12 | ±2.5 µm | 2095194 | |
| 4000: 1 | 50 | .003” | .000025” | Large 152.4 mm/ 6” diameter | 50 | / | 1.27 | ±.001” | 2095195* |
| 8000: 1 | 20 | .0015” | .000010” | 20 | / | 0.50 | ±.0005” | 2095196* | |
| 16000: 1 | 10 | .0006” | .000010” | 10 | / | 0.25 | ±.0002” | 2095197 | |
| 32000: 1 | 5 | .0003” | .000005” | 5 | / | 0.12 | ±.0001” | 2095198 | |
| 4000: 1M | 50 | 76 µm | 0.5 µm | 50 | / | 1.27 | ±25 µm | 2095199* | |
| 8000: 1M | 20 | 38 µm | 0.2 µm | 20 | / | 0.50 | ±13.5 µm | 2095200* | |
| 16000: 1M | 10 | 15.2 µm | 0.2 µm | 10 | / | 0.25 | ±5 µm | 2095201 | |
| 32000: 1M | 5 | 7.6 µm | 0.1 µm | 5 | / | 0.12 | ±2.5 µm | 2095202 | |