- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
HAKKO - Soldering Tester Thermometer
| Previous | 67 / 136 | Next |
HAKKO – Soldering Thermometer
Brand : Hakko – Japan
Model : FG-100B
Specifications:
Brand : Hakko – Japan
Model : FG-100B
Specifications:
| Model No. | FG-100B |
| Power supply | 006P 9V dry battery （alkaline cell recommended） |
| Temperature resolution | 1℃ |
| Temperature measurement range | 0 to 700℃ |
| Temperature accuracy |
±3℃（300 to 600℃） ±5℃（other than above） |
| Temperature sensor | K（CA）type thermocouple |
| Display | LCD : 3 1/2 digits |
| Operating environment | Ambient temperature/Humidity range : 0 to 40℃, max.80% RH （without condensation） |
| Environmental conditions | Applicable rated pollution degree 2 （According to IEC/UL 61010-1） |
| Dimensions | 75(W)×44(H)×140(D) mm |
| Weight | 125g |
- Dimensions are excluding protrusions.
- Weight is measured without battery.
- Temperature sensor can only be used to measure temperatures below 500ºC. To measure higher temperatures, use an applicable temperature probe.