- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
ELCOMETER - Hi-Temp (480¡ãF) Ferrous Substrate Plug In Integral Probe (PINIP™) T456 CF2PHT
| Previous | 334 / 429 | Next |
ELCOMETER - Hi-Temp (480°F) Ferrous Substrate Plug In Integral Probe (PINIP™) T456 CF2PHT
Brand: Elcometer
Model: T456 CF2PHT
Products Features:
Technical specification:
Brand: Elcometer
Model: T456 CF2PHT
Products Features:
- Designed to work with any of our Ferrous or Dual FNF Elcometer 456 Separate Gauges.
- Designed to measure coatings at temperatures up 480°F.
- Probe attaches to a separate gauge to give the performance and profile of an integral probe gauge.
- Includes two calibration foils that allow calibration over the work piece when at high temperature thereby increasing accuracy by calibrating to the specific magnetic properties of the substrate at temperature.
- For higher resolution & accuracy on thin coatings Scale 2 gauges can be switched to the Scale 1 mode measurement performance.
Technical specification:
| Range | 0-200 mils (0-5mm) |
| Accuracy | ±1-3% or ±1.0 mil (±20µm) |
| Resolution | 0.1 mil: 0-50 mils; 1mil: 50-200 mils (1µm: 0-1mm; 10µm: 1-5mm) |
| Minimum convex surface radius | 4mm (0.16'') |
| Minimum concave surface radius | 60mm (2.36'') |
| Minimum headroom | 174mm (6.85'') |
| Minimum sample diameter | 8mm (0.32'') |