- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
SHIMPO 每 Digital Stroboscope DT-3011N
| Previous | 303 / 435 | Next |
SHIMPO – Digital Stroboscope DT-3011N
Brand: Shimpo
Model: DT-3011N
Product Description:
Product Features:
Brand: Shimpo
Model: DT-3011N
Product Description:
The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source.
Product Features:
- A wide measuring range
- The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
- Provided with a phase adjustment function
- It is possible to move an image while maintaining synchronization.
- The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.
- Provided with a memory function
- The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
| format | DT-311N | DT-315N | |
|---|---|---|---|
| Number of flashes (rpm) | 40.0 to 35000 0 to 35000 in external sync mode | ||
|
Internal oscillation mode |
Display decomposition function |
0.1: 40.0 ~ 5000 0.2: ~ 8000 0.5: ~ 10000 1: ~ 35000 |
|
| Jump function | Yes (Pressing the dedicated switch doubles or doubles the number of flashes) | ||
| Integer function | Yes (display decimals, do not set)﹛﹛﹛﹛﹛﹛﹛ | ||
| Memory function | Yes (The number of flashes when the power is turned off is memorized, and the number of flashes is used when the power is turned on next time) | ||
|
External sync mode |
input signal |
Voltage input H level: 2.5V to 12V L level: 0.8V MAX Pulse width 50μs or more Input impedance 10kΩ or more |
|
| Speed measurement function | 40.0 to 35000 rpm (disabled during delayed emission) | ||
| Delayed emission |
In the range of 40.0 to 10000 rpm, the﹛ delay angle can be set every 0 to 359 ° 1 °, or the delay time can be set every 0 to 2000 ms 1 ms. |
||
| display | 5-digit red LED 7 segment | ||
| Synchronous output signal | 12V voltage signal Pulse width approx. 400μs | ||
| Setter | Multi-turn encoder, tact switch | ||
| Flash light source | Xenon lamp | ||
| Ramp input | 10W | ||
| power supply | AC100-120V |
Rechargeable (dedicated Ni-Cd battery) Light emission for about 1 hour continuously or attached AC adapter g (quick charge for 2 hours) AC100V ± 10% |
|
| Luminous timer | Continuous lighting or stop emitting after a set time of 1 to 120 minutes | ||
| Power output for sensor | DC12V 40mA | ||
| Power cord | 2.4m | 求 | |
| Operating temperature | 0-40 ⊥ | ||
| mass | 1.2kg | 2.1kg | |
| accessories | Pistol grip | Dedicated adapter | |