- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
DENSO - Belt Tension Gauge (BTG-2)
| Previous | 239 / 429 | Next |
DENSO - Belt Tension Gauge (BTG-2)
Brand: DENSO
Model: BTG-2
Product Description:
Host: BTG-2 95506-00091
Extension rod: 95506-10040(optional)
Correction plate: (95506-10050ML)
Measuring range: 100-1000N (10-100kg)
Accuracy: + 3kg
Product Features:
Operation Method:
Brand: DENSO
Model: BTG-2
Product Description:
Host: BTG-2 95506-00091
Extension rod: 95506-10040(optional)
Correction plate: (95506-10050ML)
Measuring range: 100-1000N (10-100kg)
Accuracy: + 3kg
Product Features:
- Belt Tension can be correct, and simple determination
- Using an extension rod (optional), can also be tested in a small place.
- The use of the method of measuring the needle, the most suitable for the determination of the area covered by the belt.
- Connecting part
- Return button
- Pointer
- Dial
- Hook
- Shelf
- Handle
- Steering wheel
- Interface Nut
- Interface
- Outer Shaft
- Interface Nut
- Inner Shaft
Operation Method:
- Return to the ''0'' operation method
- The numerical representation is the belt tension with the pointer, so the determination will return a pointer to ''0'' position
- This operation is the return of the ''0'' button. Central projection small button to the direction of the arrow, dial pointer to dial ''0'' location (red part range)
- Hold the tensiometer steering handle and disc is the dynamometer test essentials, as Figure shows, the hook on the belt to be measured.
- Slowly after burner. (At this point, the inner spring makes the belt band, and the pointer indicates the value of the belt's tension)
- In order to make the pointer stable and accurate, repeat the operation of the abobe 2 items
- Once again, hold tensiometer count is disengaged from the belt.
- The value of the pointer is the value of the tension of the belt (unitN)