- Color & Paint Coating Measurement
- Dimensional Measurement
- Electrical & Electronic Meter
- Electrostatics (ESD) , Ionizer & Resistivity Meter
- Environmental & Weather Aging Testing
- Gas Measurement
- Handling & Cutting Tools
- Hardness Testing
- Laboratory Equipments
- Levelling Angle Gauges
- Magnetic Testing
- Medical Equipment
- Metallography
- Microscope, Magnifier & Visual Inspection
- Packaging Flim & Paper Board Testing
- Pressure & Flow
- Rubber & Glove Testing
- Storage Dry Cabinet
- Temperature, Humidity & Moisture
- Tensile & Tension Torque/Force
- Ultrasonic NDT Testing
- Vise & Holder
- Water Analysis Meter
- Weighing
- Others
BIUGED - Rolling Wheel Wet Film Thickness Gauges 532 Series
Previous | 7 / 429 | Next |
BIUGED - Rolling Wheel Wet Film Thickness Gauges
Brand: Biuged
Model: BGD 532/1, BGD 532/2, BGD 532/3, BGD 532/4
Introduction:
The Rolling Wheel Wet Film Thickness Gauge has long been the standard for measuring wet film thickness in the coatings industry.(U.S.Patent No.3, 128,558£©.
The gauge consists of an eccentric inner wheel, supported by two large outer concentric wheel. At a specific point, the inner wheel touches and picks up wet film when the gauge is rolled on the coated surface. The critical clearance may be read on a rotating scale.
Both the body of the gauge and the centre holder are made of high-grade stainless steel. The scale value are casted on 1 side.
Biuged offer three basic models in various ranges. All models have an accuracy of 2.5µm£¨±0.0001 in£©or 2.5% full scale, whichever is greater
Brand: Biuged
Model: BGD 532/1, BGD 532/2, BGD 532/3, BGD 532/4
Introduction:
The Rolling Wheel Wet Film Thickness Gauge has long been the standard for measuring wet film thickness in the coatings industry.(U.S.Patent No.3, 128,558£©.
The gauge consists of an eccentric inner wheel, supported by two large outer concentric wheel. At a specific point, the inner wheel touches and picks up wet film when the gauge is rolled on the coated surface. The critical clearance may be read on a rotating scale.
Both the body of the gauge and the centre holder are made of high-grade stainless steel. The scale value are casted on 1 side.
Biuged offer three basic models in various ranges. All models have an accuracy of 2.5µm£¨±0.0001 in£©or 2.5% full scale, whichever is greater
Technical Parameters: